SELECT YOUR VEHICLE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Featured Brands
suspension uae, suspension system, suspension dubai
30+ Years of high level experience | Always competent & successful
Wide range of products | Well respected by our clients
Part Number: K&N-661401
K&N-661401 &N XSTREAM AIR FLOW TOP
/shop/product/k-n-661401-k-n-661401-n-xstream-air-flow-top-2327294.00 AED 192.15 AED 192.15 AED
280.00 AED
Product not available
Description:
X-Stream Top Filter
Part Number: K&N 63-9032-1
K&N 63-9032-1 K&N PERFORMANCE AIR INTAKE SYSTEM
/shop/product/k-n-63-9032-1-k-n-63-9032-1-k-n-performance-air-intake-system-23111,528.80 AED 1,074.15 AED 1074.15 AED
1,456.00 AED
Product not available
Description:
OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
SPECIFICATIONS
Estimated Horsepower Gain 8.09 HP @ 4717 RPM
Replacement Filter RU-1041
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 6
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 7.5 in (191 mm)
Alternate Replacement Filter RF-1041
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 15.2 lb (6.9 kg)
Air Filter Large End Diameter 7.5 in (191 mm)
Product Box Height 15.6 in (396 mm)
Product Box Length 24.2 in (615 mm)
Product Box Width 20.2 in (513 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes
Part Number: K&N 63-2565
K&N 63-2565 K&N PERFORMANCE AIR INTAKE SYSTEM
/shop/product/k-n-63-2565-k-n-63-2565-k-n-performance-air-intake-system-23041,310.40 AED 1,102.50 AED 1102.5 AED
1,248.00 AED
Product not available
Description:
OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
SPECIFICATIONS
Estimated Horsepower Gain 15.31 HP @ 6000 RPM
Replacement Filter RF-1048
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 6
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6 in (152 mm)
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.3 lb (4.7 kg)
Air Filter Large End Diameter 7.5 in (191 mm)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes
Part Number: K&N 71-1576
K&N 71-1576 K&N PERFORMANCE AIR INTAKE SYSTEM
/shop/product/k-n-71-1576-k-n-71-1576-k-n-performance-air-intake-system-32131,916.51 AED 1,627.50 AED 1627.5 AED
1,825.25 AED
Product not available
Description:
OVERVIEW
Blackhawk Induction™ air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW® synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
MORE INFORMATION
Guaranteed to increase horsepower and torque
Powder-coated aluminum intake tube paired with dry synthetic air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
SPECIFICATIONS
Estimated Horsepower Gain 9.1 HP @ 5400 RPM
Replacement Filter RU-3107HBK
Air Filter Color Black
Air Filter Material Non-woven Synthetic
Air Filter Outlet Shape Round
Clamps Included 5
Clamp Material Stainless Steel
Clamp Style Worm Gear
Couplers Included 2
Product Style 71 Series Kits
Intake Pipe Color / Finish Textured Black
Intake Pipe Material Aluminum
CARB EO Number D-269-84
Street Legal In All US States See Vehicle Applications
TUV Approved (Europe) No
Weight 10.4 lb (4.7 kg)
Product Box Height 14.5 in (368 mm)
Product Box Length 24.1 in (612 mm)
Product Box Width 15.5 in (394 mm)
Mounting Hardware Included Yes
Part Number: K&N 63-2599
K&N 63-2599 K&N PERFORMANCE AIR INTAKE SYSTEM
/shop/product/k-n-63-2599-k-n-63-2599-k-n-performance-air-intake-system-3211Description:
OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Skip to the beginning of the images gallery
OVERVIEW
MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
SPECIFICATIONS
Estimated Horsepower Gain 12.3 HP @ 4915 RPM
Replacement Filter RU-5173
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 7
Clamp Material Stainless Steel
Clamp Style Worm Gear
Couplers Included 3
Product Style 63 Series Aircharger Kits
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10 lb (4.5 kg)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes
Part Number: K&N 63-2593
K&N 63-2593 K&N PERFORMANCE AIR INTAKE SYSTEM
/shop/product/k-n-63-2593-k-n-63-2593-k-n-performance-air-intake-system-32101,771.88 AED 1,496.25 AED 1496.25 AED
1,687.50 AED
Product not available
Description:
OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
SPECIFICATIONS
Estimated Horsepower Gain 19.37 HP @ 4500 RPM
Replacement Filter RU-1042
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 7
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6.5 in (165 mm)
Alternate Replacement Filter RF-1042
Intake Pipe Color / Finish None
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.9 lb (4.9 kg)
Product Box Height 14.5 in (368 mm)
Product Box Length 24.1 in (612 mm)
Product Box Width 15.5 in (394 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes
Part Number: K&N 63-2592
K&N 63-2592 K&N PERFORMANCE AIR INTAKE SYSTEM
/shop/product/k-n-63-2592-k-n-63-2592-k-n-performance-air-intake-system-32091,771.88 AED 1,771.88 AED 1771.875 AED
1,687.50 AED
Product not available
Description:
OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
SPECIFICATIONS
Estimated Horsepower Gain 23.01 HP @ 3505 RPM
Replacement Filter RU-5173
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 7
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6 in (152 mm)
Intake Pipe Color / Finish None
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.1 lb (4.6 kg)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes
Part Number: K&N 63-1576
K&N 63-1576 K&N PERFORMANCE AIR INTAKE SYSTEM
/shop/product/k-n-63-1576-k-n-63-1576-k-n-performance-air-intake-system-3208Description:
OVERVIEW
An enclosed air box design helps protect the filter and inlet air from the heat of the engine bay, and the air box lid allows for quick and easy access to the filter without tools. A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design of the filter allows you to go up to 100,000 miles between filter services under normal highway driving conditions. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
MORE INFORMATION
Guaranteed to increase horsepower and torque
Enclosed air box helps protect the filter from heat in the engine bay
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
SPECIFICATIONS
Estimated Horsepower Gain 12.5 HP @ 4630 RPM
Replacement Filter RU-2815
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 3
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 1
Product Style 63 Series Aircharger Kits
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.4 lb (4.7 kg)
Product Box Height 14.5 in (368 mm)
Product Box Length 24.1 in (612 mm)
Product Box Width 15.5 in (394 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes
Part Number: K&N 63-1564
K&N 63-1564 K&N PERFORMANCE AIR INTAKE SYSTEM
/shop/product/k-n-63-1564-k-n-63-1564-k-n-performance-air-intake-system-3207Description:
OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
SPECIFICATIONS
Estimated Horsepower Gain 8.09 HP @ 5231 RPM
Replacement Filter RU-1042
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 5
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 1
Product Style 63 Series Aircharger Kits
Air Filter Height 6.5 in (165 mm)
Alternate Replacement Filter RF-1042
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 13 lb (5.9 kg)
Product Box Height 10.25 in (260 mm)
Product Box Length 36.19 in (919 mm)
Product Box Width 18.13 in (460 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes
Part Number: K&N RU-2520
K&N RU-2520 UNIVERSAL CLAMP-ON AIR FILTER
/shop/product/k-n-ru-2520-k-n-ru-2520-universal-clamp-on-air-filter-2325Description:
Round Tapered; 4 In (102 Mm) Flange Id; 5 In (127 Mm) Height; 5.375 In (137 Mm) Base; 4.375 In (111 Mm) Top.
Designed To Increase Horsepower And Acceleration.
Hundreds Of Sizes And Shapes For Most Applications.
High Air Flow With Excellent Filtration.
Clamp-On Washable And Reusable Air Filter.
Pliable Flanges Absorb Vibration And Can Be Stretched Up To 1/16 In. To Fit In-Between Sizes.
Part Number: K&N RF-1036
K&N RF-1036 UNIVERSAL CLAMP-ON AIR FILTER
/shop/product/k-n-rf-1036-k-n-rf-1036-universal-clamp-on-air-filter-2323300.56 AED 300.56 AED 300.5625 AED
286.25 AED
Product not available
Description:
Round Tapered; 6 In (152 Mm) Flange Id; 6 In (152 Mm) Height; 7.5 In (191 Mm) Base; 5 In (127 Mm) Top.
Designed To Increase Horsepower And Acceleration.
Hundreds Of Sizes And Shapes For Most Applications.
High Air Flow With Excellent Filtration.
Clamp-On Washable And Reusable Air Filter.
Pliable Flanges Absorb Vibration And Can Be Stretched Up To 1/16 In. To Fit In-Between Sizes.
Part Number: K&N RA-0950
K&N RA-0950 UNIVERSAL RUBBER FILTER
/shop/product/k-n-ra-0950-k-n-ra-0950-universal-rubber-filter-2322202.81 AED 202.81 AED 202.8075 AED
193.15 AED
Product not available
Description:
Designed To Increase Horsepower And Acceleration.
Hundreds Of Sizes And Shapes For Most Applications.
High Air Flow With Excellent Filtration.
Clamp-On Washable And Reusable Air Filter.
Pliable Flanges Absorb Vibration And Can Be Stretched Up To 1/16 In. To Fit In-Between Sizes.
Round Straight; 3.063 In (78 Mm) Flange Id; 3 In (76 Mm) Height; 7 In (178 Mm) Base; 7 In (178 Mm) Top.
Part Number: K&N 63-3070
K&N 63-3070 K&N PERFORMANCE AIR INTAKE SYSTEM
/shop/product/k-n-63-3070-k-n-63-3070-k-n-performance-air-intake-system-2308Description:
Estimated Horsepower Gain Of 10.25 Hp At 5342 Rpm.
Designed To Improve Throttle Response And Engine Sound.
Easy To Install, Usually In 90 Minutes Or Less.
Replaces Entire Factory Air Intake System.
Part Number: K&N 63-1566
K&N 63-1566 K&N PERFORMANCE AIR INTAKE SYSTEM
/shop/product/k-n-63-1566-k-n-63-1566-k-n-performance-air-intake-system-2302Description:
OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
SPECIFICATIONS
Estimated Horsepower Gain 12.2 HP @ 5600 RPM
Replacement Filter RF-1048
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 5
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6 in (152 mm)
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.8 lb (4.9 kg)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes