( 4W-BD1068T) 4W-BD1068T SHOCKS 35MM NITRO GAS FRONT

JEEP / WRANGLER / 1996-2007

35Mm Nitro Gas Shock Absorber Tough Dog front 35mm twin tube nitrogen Gas shock absorbers which are suitable for standard to 35mm raised height. (sold in pairs) The Tough Dog 35mm Gas Shock Absorbers have been designed with comfort and control in mind, equipped with velocity sensitive valving they will adjust automatically to road conditions. Ideal for light and medium duty 4WD's Features include: * 35mm bore size. * Low pressure gas design for comfort and reduced fade. * Double chrome plated shaft. * High temperature resistant fluid. * Standard and long travel options. * Weight: 3.0 kg

( 4W-BD1443T) 4W-BD1443T SHOCKS 35MM NITRO GAS REAR

JEEP / WRANGLER / 1996-2007

PRODUCT DESCRIPTION Features 35mm Internal Bore and piston with twin tube design Low Pressure Nitrogen Gas to eliminate fade for better performance and comfortable ride Double chrome-plated shaft High temperature resistant fluid Custom made for each 4WD up to Hilux size OEM or longer length shocks to suit standard or raised 4WD for maximum articulation, comfort safety & durability

Description
Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application.

The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade.

Large 41mm internal bore
Twin tube design
High temperature, all weather oil
18mm, double chrome-plated rod
Additional welding on all studs & eyerings
Multi stage Velocity Sensitive Valving
Rod wiper seal and multi lip seal
Hydraulic rebound stop

( 4W-TDC354) Tough Dog 50mm Raised Height Front Springs (TDC354)

JEEP / WRANGLER / 1996-2007

DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 40mm Lift Spring Suits up to Bullbar (45mm Lift) COMPATIBILITY Jeep Wrangler 10/1996 - 2007 TJ Up to Bullbar - FRONT - 45mm Lift

( 4W-TDC355) 4W-TDC355 SPRINGS 0-300KG LOAD 45MM LIFT REAR

JEEP / WRANGLER / 1996-2007

Tough Dog rear springs with 45mm raised height. (sold in pairs) The Tough Dog coil springs are designed and manufactured in Australia, and in most cases use the new generation X5K steel in the manufacturing process. An extremely high quality coil spring 0-300Kg Load (45Mm Lift)

X-Stream Top Filter

Outflows The Factory Intake By Up To 40%. Produces An Additional 14 Horsepower And 17 Lbs. X Ft. Torque Max Gains.
3-Layer Non-Oiled, Washable Synthetic Media For The Perfect Balance Of Performance, Protection And Convenience.
One-Piece, Black Powder Coated 16-Gauge Heat Shield Uses Factory Mounting Locations.
Heat-Insulating Molded Plastic Tube Replaces The Stock Intake Tract.
This Product Is Not Carb Exempt At This Time And Is Not Legal For Sale In California Or Use On Vehicles Registered With The California Department Of Motor Vehicles.
Black Powder Coated Heat Shield.
Replaces The Factory Intake Box And Uses The Factory Inlet Tube.
This Product Is 50-State Legal (Carb E.O Number D-550-3).

Bringing you the next generation of intakes, the Momentum GT sealed air intake system for the 07-08 GM Gas Trucks/SUV's with V8-6.2L engine and equipped with electric fan. The Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. From the one-piece sealed housing with a built-in sight window, to the massive air filter, roto-molded tube and premium hardware. This system is superior in every way.

Proven Results:
After a rigorous design and testing phase, the results are in. The Momentum GT intake system outflowed the factory intake by 19% and produced 8 additional horsepower and 11 lbs. x ft. torque.

Huge 3-Layer Performance Air Filter:
The Momentum GT is designed around an oil-free, large 9" round 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.

Unique One-Piece Housing:
The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A urethane plug is also included if you wish to completely seal the air box.

Roto-mold Tube:
This System uses a CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit.

Premium Hardware:
Premium stainless steel T-bolt clamps are used to securely mount the high flow air filter to the 1-piece airbox. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

Power, Protection and Simplicity.

VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
2007-2008 Cadillac Escalade GMT900; Also fits EXT & ESV models V8 6.2L Gas
2007-2008 Chevrolet Silverado 1500 (GMT900) V8 4.8L Gas
2007-2008 Chevrolet Silverado 1500 (GMT900) w/ Electric Fan V8 5.3L Gas
2007-2008 Chevrolet Silverado 1500 (GMT900) w/ Electric Fan V8 6.0L Gas
2007-2008 Chevrolet Suburban GMT900 w/ Electric Fan V8 5.3L Gas
2007-2008 Chevrolet Suburban GMT900 w/ Electric Fan V8 6.0L Gas
2007-2008 Chevrolet Tahoe GMT900 V8 4.8L Gas
2007-2008 Chevrolet Tahoe GMT900 w/ Electric Fan V8 5.3L Gas
2007-2008 GMC Sierra GMT900 V8 4.8L Gas
2007-2008 GMC Sierra GMT900 w/ Electric Fan V8 5.3L Gas
2007-2008 GMC Sierra GMT900 w/ Electric Fan V8 6.0L Gas
2007-2008 GMC Sierra Denali; GMT900 w/ Electric Fan V8 6.2L Gas
2007-2008 GMC Yukon GMT900 V8 4.8L Gas
2007-2008 GMC Yukon GMT900 w/ Electric Fan V8 5.3L Gas
2007-2008 GMC Yukon Denali (GMT900) w/ Electric Fan V8 6.2L Gas
2007-2008 GMC Yukon XL GMT900 w/ Electric Fan V8 5.3L Gas
2007-2008 GMC Yukon XL GMT900 w/ Electric Fan V8 6.0L Gas
2007-2008 GMC Yukon XL Denali (GMT900) w/ Electric Fan V8 6.2L Gas