Serrated/Helix Design:
The Serrated/Helix combination design creates intake turbulence in the combustion chamber. This turbulence breaks up the fuel which creates a more complete combustion cycle increasing horsepower, torque and improving throttle response. The Serrated/Helix combination design also reduces intake whistle that occurs with Helix only designs.

6061-T6 Billet Aluminum Construction:
All Silver Bullet Throttle Body Spacers are constructed from 6061-T6 billet aluminum precision machined for light weight, high strength and perfect fit and finish.

Longer Intake Tract:
Adding a Silver Bullet Throttle Body spacer lengthens the intake tract which helps increasing intake air speed increasing performance and improved throttle response.

Installation Is A Snap:
This Silver Bullet throttle body spacer uses all factory mounting locations providing stability and a hassle-free installation.


VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
1998-2004 Lexus LX470 V8 4.7L Gas
2003-2004 Toyota 4Runner V8 4.7L Gas
1998-2004 Toyota Land Cruiser J100 V8 4.7L Gas
2001-2004 Toyota Sequoia V8 4.7L Gas
2000-2004 Toyota Tundra V8 4.7L Gas

Serrated/Helix Design:

The Serrated/Helix design creates air turbulence in the intake manifold. This turbulence increases the air pressure in the combustion chamber resulting in increased horsepower, torque and improved throttle response. The Serrated/Helix combination design also reduces intake whistle that occurs with other helix only designs.
6061-T6 Billet Aluminum Construction:
All Silver Bullet Throttle Body Spacers are precision machined from 6061-T6 billet aluminum for lightweight, high strength and perfect fit and finish.

Installation Is A Snap:
This Silver Bullet throttle body spacer uses all factory mounting locations and a gasket providing stability and a hassle-free installation.

VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
2001-2016 Nissan Patrol (Y61) w/ Manual Trans. I6 4.8L Gas

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.



Skip to the beginning of the images gallery
OVERVIEW
MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 12.13 HP @ 4623 RPM
Replacement Filter RU-1045
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 4
Clamp Material Stainless Steel
Clamp Style Regular
CARB EO Number D-269-34
Couplers Included 1
Type Gen II
Product Style 57 Series FIPK
Air Filter Height 8 in (203 mm)
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States Yes
TUV Approved (Europe) No
Weight 11 lb (5 kg)
Air Filter Large End Diameter 5.5 in (140 mm)
Product Box Height 10.5 in (267 mm)
Product Box Length 35.5 in (902 mm)
Product Box Width 13.25 in (337 mm)
Mounting Hardware Included Yes

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.



MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 15.31 HP @ 6000 RPM
Replacement Filter RF-1048
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 6
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6 in (152 mm)
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.3 lb (4.7 kg)
Air Filter Large End Diameter 7.5 in (191 mm)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.



MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 8.09 HP @ 4717 RPM
Replacement Filter RU-1041
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 6
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 7.5 in (191 mm)
Alternate Replacement Filter RF-1041
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 15.2 lb (6.9 kg)
Air Filter Large End Diameter 7.5 in (191 mm)
Product Box Height 15.6 in (396 mm)
Product Box Length 24.2 in (615 mm)
Product Box Width 20.2 in (513 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 13.05 HP @ 5282 RPM
Replacement Filter RU-1042
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 5
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 3
Product Style 63 Series Aircharger Kits
Air Filter Height 6.5 in (165 mm)
Alternate Replacement Filter RF-1042
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 14.2 lb (6.4 kg)
Air Filter Large End Diameter 7.5 in (191 mm)
Product Box Height 12.5 in (318 mm)
Product Box Length 18.25 in (464 mm)
Product Box Width 18.25 in (464 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 10.68 HP @ 5341 RPM
Replacement Filter RU-1041
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 5
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 1
Product Style 63 Series Aircharger Kits
Air Filter Height 7.5 in (191 mm)
Alternate Replacement Filter RF-1041
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 13.4 lb (6.1 kg)
Product Box Height 13.4 in (340 mm)
Product Box Length 24.2 in (615 mm)
Product Box Width 14.4 in (366 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

The Universal Off-Road Canister from aFe Power is the baddest off-road intake on the planet. The huge 15.5 IN conical Pro-GUARD 7 air filter provides maximum protection delivering clean air to your motor. In recent testing, this intake produced 21hp, 36lbs. x ft. torque. The oversized adjustable ram scoop allows for maximum intake volume and a cool intake charge. The cross-linked polypropylene rotomolded plastic canister houses the air filter and protects against debris and extreme weather conditions. The universal clamp mounting system provides easy mounting to almost any buggy or sand rail available. This product was "Off-Road Business" Magazine's 2007 Editors Choice Product of the Year.

Intake Housing Dimensions: 15.5 IN Width, 12.6 IN Total Height, 9.85 IN Barrell Height, 4 IN Inlet Diameter and 5 IN Scoop Diameter.

Scoop Dimensions: 5 IN Inlet Diameter, 5 IN x 6 IN Square Scoop Inlet. 8.97 IN Total Height and 8.5 IN Total Width.

Outflows The Factory Intake By Up To 66%. Produces An Additional 20 Horsepower And 20 Lbs. X Ft. Torque Max Gains.
3-Layer Non-Oiled, Washable Synthetic Media For The Perfect Balance Of Performance, Protection And Convenience.
Sealed Roto-Molded Plastic Housing With A Black Powder-Coated Aluminum Cover And Auxiliary Air Inlet.
Cad Designed, Dyno-Tuned, Roto-Molded Intake Tube.

Unique One-Piece High Quality Housing W/ Sight Window:
A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to block off the auxiliary air inlet.

High Quality Tube:
This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded designed intake tube to fit with the stock mechanical fan and achieve maximum power gains while maintaining a perfect fit.

Large 3-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large 5" round flange and is 9" tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles.

Premium Hardware:
High quality premium clamps ensures the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.


VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
2016-2019 Chevrolet Silverado 2500 HD V8 6.0L Gas
2016-2019 Chevrolet Silverado 3500 HD V8 6.0L Gas
2016-2019 GMC Sierra 2500 HD V8 6.0L Gas
2016-2019 GMC Sierra 3500 HD V8 6.0L Gas

Add more power to your Mustang 5.0L with the aFe Stage-2 performance intake system. This Stage-2 cold air intake system produces 22HP and 27lbs. x ft. torque and outflowed the factory intake by 33%. A one-piece 16 gauge steel, powder-coated heat shield uses an auxiliary air scoop to directly supply cool air from the front of the vehicle straight to the filter for maximum performance. This intake system also features a polished aluminum tube with a built-in MAF pad and is attached to a 3-angle filter adapter to smoothly guide increased air-flow into the engine with minimal restriction. The Pro DRY S media air filter is washable and reusable and is constructed with 100% polyurethane for a long life and multiple cleaning cycles.

8 IN Tall Conical Pro DRY S Air Filter:
This intake utilizes a huge, 8 IN tall conical Pro DRY S performance air filter. This 3-layer progressive, synthetic material air filter requires no oils and cleans with soap and water for maximum convenience.

One-Piece Heat Shield:
The air filter is housed in a one-piece, black powder-coated 16-gauge heat shield and uses a built in auxiliary air scoop to capture cool air from the front of the vehicle for maximum performance. This one-piece heat shield uses factory mounting locations and comes with all brackets and hardware for a hassle-free installation.

Dyno Tested Intake Tube:
The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.

Velocity Stack 3-Angle Adapter:
A large 3-angle filter adapter is used to speed up the air flow after the air filter for improved performance and throttle response.


VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
2011-2014 Ford Mustang GT V8 5.0L Gas

VUE D’ENSEMBLE
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


PLUS D’INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools

SPECIFICATIONS
Estimated Horsepower Gain 9.25 HP @ 5497 RPM
Replacement Filter RU-1044
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 5
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 3
Product Style 63 Series Aircharger Kits
Air Filter Height 8 in (203 mm)
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 13.8 lb (6.2 kg)
Product Box Height 12.5 in (318 mm)
Product Box Length 18.25 in (464 mm)
Product Box Width 18.25 in (464 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes