SELECT YOUR VEHICLE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Featured Brands
suspension uae, suspension system, suspension dubai
30+ Years of high level experience | Always competent & successful
Wide range of products | Well respected by our clients
Part Number: BNDL_4W-BM404900_4W-BM401114
SHOCKS 40MM 9 STAGE - ADJUSTABLE - FRONT/REAR
/shop/product/bndl-4w-bm404900-4w-bm401114-shocks-40mm-9-stage-adjustable-front-rear-6807Description:
( 4W-BM404900) 4W-BM404900 SHOCKS 40MM ADJUSTABLE STRUT FRONT
TOYOTA / LANDCRUISER / 2007-UP
Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings
( 4W-BM401114) 4W-BM401114 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR
TOYOTA / LANDCRUISER / 1998- UP
Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings 40Mm 9 Stage Adjustable (Suits Up To 25Mm Lift)
Part Number: BNDL_4W-BMX454900_4W-BMX1114/2
SHOCKS 45MM 9 STAGE - ADJUSTABLE - FRONT/REAR
/shop/product/bndl-4w-bmx454900-4w-bmx1114-2-shocks-45mm-9-stage-adjustable-front-rear-68083,238.20 AED 3,238.20 AED 3238.2 AED
3,084.00 AED
Product not available
Add to Cart
Description:
( 4W-BMX454900) 4W-BMX454900 SHOCKS 45MM ADJUSTABLE FRONT
TOYOTA / LANDCRUISER / 2007-UP
DESCRIPTION These tough puppies are the largest bore externally adjustable shocks available on the market. There is nothing that can compare to the 45mm bore in a 70mm outer casing. This is one serious shock. The 9 stages of adjustment mean you can control the firmness of your shocks easily, and adapt to the conditions as required. Choose a firmer ride for your highway travels, and then dial them down when it’s time to get down to business. 45mm big bore adjustables are designed for big lift applications up to six inches over factory in some vehicles. Our adjustable shocks are built tough for the Aussie outback. As well as the Foam Cell insert to combat shock fade, the 45mm adjustable also incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. Our big bore shocks also have a DU bushing fitted internally to protect the seals from damage caused by side load at full extension. 45mm internal bore 70mm external casing 22mm chrome plated rod High temperature, all weather oil Foam cell technology 9 Stage external adjustment Additional welding on all studs and eyerings
( 4W-BMX1114/2) 4W-BMX1114/2 SHOCK 45MM 9 STAGE ADJUSTABLE REAR
TOYOTA / LANDCRUISER / 1998-2007
DESCRIPTION Rear Set of 2 Shock Absorber Tough Dog Pair of 45mm Bore Adjustable Shock Absorbers Official Tough Dog Dealer. BIG BORE Adjustable shock absorbers feature a 45mm bore, 70mm external casing, and a 22mm piston rod. Designed to fit heavy duty vehicles especially those with lift kit fitted. With internal DU bushings fitted, these shocks are perfect for all BIG LIFT, OFFROAD work.
Part Number: BNDL_4W-BM401050_4W-BM401377
2x 40MM 9 STAGE ADJUSTABLE UPTO 50MM FRONT And 2x REAR Stocks for Landcruiser 71,74 SERIES
/shop/product/bndl-4w-bm401050-4w-bm401377-2x-40mm-9-stage-adjustable-upto-50mm-front-and-2x-rear-stocks-for-landcruiser-71-74-series-7052Description:
( 4W-BM401377) 40mm 9 Stage Adjustable REAR Shocks (Landcruiser 71-79 Series)
TOYOTALANDCRUISER - 71, 74 SERIES - HZJ71 & HZJ74
DESCRIPTION The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with our Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Our adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings SPECIFICATIONS 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota 4Runner 11/1985 - 1989 IFS with Leaf Rear 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Hilux 11/1983 - 1997 Leaf/Leaf 4WD 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Hilux 10/1988 - 1997 Torsion Bar Front 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Hilux 10/1997 - 2005 Torsion Bar Front 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Landcruiser HZJ71 and HZJ74 71, 74 Series SWB and LWB 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Landcruiser 11/1984 - 1992 70, 73, 74 Series 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Landcruiser 11/1984 - 1999 75 Series 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits up to 50mm Lift - Toyota Landcruiser 2007+ 76 Series Wagon 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits up to 50mm Lift - Toyota Landcruiser 1993 -1999 77 Series FZJ77, HZJ77, PZJ77 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits up to 50mm Lift - Toyota Landcruiser 10/1999+ 78, 79 Series inc V8 (Except Dual Cab) 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits up to 50mm Lift - Toyota Landcruiser 2012+ 79 Series Dual Cab COMPATIBILITY Toyota 4Runner 11/1985 - 1989 IFS with Leaf Rear Toyota Hilux 11/1983 - 1997 Leaf/Leaf 4WD Toyota Hilux 10/1988 - 1997 Torsion Bar Front Toyota Hilux 10/1997 - 2005 Torsion Bar Front Toyota Landcruiser HZJ71 and HZJ74 71, 74 Series SWB and LWB Toyota Landcruiser 11/1984 - 1992 70, 73, 74 Series Toyota Landcruiser 11/1984 - 1999 75 Series Toyota Landcruiser 2007+ 76 Series Wagon Toyota Landcruiser 1993 -1999 77 Series FZJ77, HZJ77, PZJ77 Toyota Landcruiser 10/1999+ 78, 79 Series inc V8 (Except Dual Cab) Toyota Landcruiser 2012+ 79 Series Dual Cab
( 4W-BM401050) 40mm 9 Stage Adjustable Front Shocks (Landcruiser 71-79 Series)
LAND CRUISER 71,74 SERIES
DESCRIPTION The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with our Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Our adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings SPECIFICATIONS 2x FRONT 40mm 9 Stage Adjustable Shock Absorbers - suit up to 50mm Lift - Toyota Landcruiser HZJ71 and HZJ74 71, 74 Series SWB and LWB 2x FRONT 40mm 9 Stage Adjustable Shock Absorbers - suit up to 50mm Lift - Toyota Landcruiser 2007+ 76 Series Wagon 2x FRONT 40mm 9 Stage Adjustable Shock Absorbers - suit up to 50mm Lift - Toyota Landcruiser 10/1999+ 78, 79 Series inc V8 (Except Dual Cab) 2x FRONT 40mm 9 Stage Adjustable Shock Absorbers - suit up to 50mm Lift - Toyota Landcruiser 2012+ 79 Series Dual Cab COMPATIBILITY Toyota Landcruiser HZJ71 and HZJ74 71, 74 Series SWB and LWB Toyota Landcruiser 2007+ 76 Series Wagon Toyota Landcruiser 10/1999+ 78, 79 Series inc V8 (Except Dual Cab) Toyota Landcruiser 2012+ 79 Series Dual Cab
Part Number: BNDL_4W-FC404932_4W-FC43041
40mm ADJUSTABLE SHOCK ABSORBER FRONT and REAR
/shop/product/bndl-4w-fc404932-4w-fc43041-40mm-adjustable-shock-absorber-front-and-rear-70772,397.15 AED 2,397.15 AED 2397.15 AED
2,283.00 AED
Product not available
Add to Cart
Description:
( 4W-FC404932) FRONT Up to 40mm Lift - STRUT Only FOAM CELL TOYOTA LANDCRUISER 300 SERIES 2021-UP
TOYOTA LANDCRUISER 300 SERIES 2021-UP
Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application. The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade. Large 40mm internal bore Twin tube design High temperature, all weather oil 18mm, double chrome-plated rod Additional welding on all studs & eyerings Multi stage Velocity Sensitive Valving Rod wiper seal and multi lip seal Hydraulic rebound stop *Representative Image Contents May Vary
( 4W-FC43041) REAR 35mm Lift FOAM CELL - SHOCK ABSORBER TOYOTA LANDCRUISER 300 SERIES 2021-UP
TOYOTA LANDCRUISER 300 SERIES 2021-UP
Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application. The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade. Large 41mm internal bore Twin tube design High temperature, all weather oil 18mm, double chrome-plated rod Additional welding on all studs & eyerings Multi stage Velocity Sensitive Valving Rod wiper seal and multi lip seal Hydraulic rebound stop *Representative Image Contents May Vary
Part Number: 4W-4WAY-001
4W-4WAY-001 REPLACEMENT BUSHES
/shop/product/4w-4way-001-4w-4way-001-replacement-bushes-162261.16 AED 61.16 AED 61.1625 AED
58.25 AED
Product not available
Description:
Suits Bottom Front Eyering (Eyering Bonded Bushing)
Part Number: 4W-EXT5001
4W-EXT5001 STEERING STABILIZERS
/shop/product/4w-ext5001-4w-ext5001-steering-stabilizers-1652Description:
DESCRIPTION
The Tough Dog EXT steering damper is our affordable, heavy duty replacement damper.
Designed for mild applications as a replacement damper when the OEM gear just isn’t quite cutting the mustard, this damper will give you control and feeling back in your steering set up. With a 35mm internal bore and our Foam Cell insert to fight against fade in harsh use situations, this damper is the perfect companion for anyone looking to gain a new lease on life from their steering.
Superb road handling characteristics
35mm bore for heavy-duty use
Eliminate shimmy
Large range to suit most 4WD applications
H/Duty Replacement Damper
Part Number: 4W-FC404900
4W-FC404900 SHOCKS 40MM FOAM CELL FRONT
/shop/product/4w-fc404900-4w-fc404900-shocks-40mm-foam-cell-front-1660643.65 AED 643.65 AED 643.65 AED
613.00 AED
Product not available
Description:
DESCRIPTION
Front Set of 2 Shock Absorber Tough Dog
Pair of 41mm Bore Foam Cell Strut Shock Absorbers
Official Tough Dog Dealer.
Tough Dog Foam Cell shocks are a large bore shock, (41mm) that are built for heavy-duty use and for coil sprung vehicles. The use of micro-cellular foam inserts has produced a new breed of shocks, which are more resistant to fade.
Part Number: 4W-TDPR-003
4W-TDPR-003 ADJUSTABLE PANHARD ROD REAR
/shop/product/4w-tdpr-003-4w-tdpr-003-adjustable-panhard-rod-rear-4536Description:
DESCRIPTION
Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights.
COMPATIBILITY
Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR
Part Number: 4W-TDPR-200
4W-TDPR-200 ADJUSTABLE PANHARD ROD REAR
/shop/product/4w-tdpr-200-4w-tdpr-200-adjustable-panhard-rod-rear-1701Description:
DESCRIPTION
Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights.
Part Number: BNDL_4W-TDR1114
4W-TDR1114 SHOCK ABSORBERS 53MM NON ADJUSTABLE 2 X REAR
/shop/product/bndl-4w-tdr1114-4w-tdr1114-shock-absorbers-53mm-non-adjustable-2-x-rear-68821,372.88 AED 1,372.88 AED 1372.875 AED
1,307.50 AED
Product not available
Add to Cart
Description:
( 4W-TDR1114) 4W-TDR1114 SHOCK ABSORBERS 53MM NON ADJUSTABLE REAR
TOYOTA / LANDCRUISER / 1998-UP
DESCRIPTION The Tough Dog ‘Ralph’ shock is the largest 4WD shock on the market. We redesigned shocks originally intended for prime movers to suit 4WD applications. The Ralph shock has a massive 53mm bore and 22mm chrome piston rod, all housed in a 70mm casing. These big dogs carry so much oil, they will run cool over even the toughest of terrain. If you drive a fully laden off road tourer, these are the shocks for you. Huge 53mm bore Twin tube design High temperature, all weather oil 22mm double chrome-plated rod Additional welding on all studs & eye rings Multi stage Velocity Sensitive Valving Rod wiper seal and multi lip seal Hydraulic rebound stop COMPATIBILITY Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR - suits up to 25mm Lift Toyota Landcruiser 11/2007+ 200 Series - REAR - suits up to 20mm Lift Toyota Landcruiser 11/2007+ 200 Series - Armoured - REAR - suits up to 20mm Lift
Part Number: 4W-TDSB-006
4W-TDSB-006 33mm Sway Bar REAR
/shop/product/4w-tdsb-006-4w-tdsb-006-33mm-sway-bar-rear-17031,512.53 AED 1,512.53 AED 1512.525 AED
1,440.50 AED
Product not available
Description:
DESCRIPTION
Designed to reduce tail shaft angle and remove driveline vibration that arises from an out-of-phase drivetrain. The universal joints in a vehicle’s tailshaft must operate at the same angle to operate harmoniously. If the angle of one universal joint is different to the other, or the universal joints are forced to operate on an angle larger that within tolerance, the resulting vibration can be felt through the vehicle when driven. To restore the universal joints to harmony, Tough Dog spacer kits are available for vehicles that commonly suffer from vibration.
COMPATIBILITY
Part Number: BNDL_4W-TDUK-1724/15
4W-TDUK-1724/15 URETHANE SPRING SPACER 15MM 2 X REAR
/shop/product/bndl-4w-tduk-1724-15-4w-tduk-1724-15-urethane-spring-spacer-15mm-2-x-rear-6883223.76 AED 223.76 AED 223.755 AED
213.10 AED
Product not available
Add to Cart
Description:
( 4W-TDUK-1724/15) 4W-TDUK-1724/15 URETHANE SPRING SPACER 15MM REAR
TOYOTA / LANDCRUISER / 1990-2007
DESCRIPTION When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs. SPECIFICATIONS 1 per coil as required COMPATIBILITY Toyota Landcruiser 03/1990 - 2007 80 and 105 Series - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 3in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 4in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 5in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 6in Lift - REAR Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR
Part Number: BNDL_4W-TDUK-1724/30
4W-TDUK-1724/30 URETHANE SPRING SPACER 30MM 2 X REAR
/shop/product/bndl-4w-tduk-1724-30-4w-tduk-1724-30-urethane-spring-spacer-30mm-2-x-rear-6884235.73 AED 235.73 AED 235.725 AED
224.50 AED
Product not available
Add to Cart
Description:
( 4W-TDUK-1724/30) 4W-TDUK-1724/30 URETHANE SPRING SPACER 30MM REAR
TOYOTA / LANDCRUISER / 1990-2007
DESCRIPTION When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs. SPECIFICATIONS 1 per coil as required COMPATIBILITY Toyota Landcruiser 03/1990 - 2007 80 and 105 Series - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 4in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 4in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 5in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 6in Lift - REAR Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR
Part Number: BIL 24-027403
BIL 24-027403 B6 4600 - SHOCK ABSORBER 1.5-2'' LIFT REAR (WITHOUT RESERVIOR)
/shop/product/bil-24-027403-bil-24-027403-b6-4600-shock-absorber-1-5-2-lift-rear-without-reservior-2058584.85 AED 313.89 AED 313.887 AED
557.00 AED
Product not available
Description:
TOYOTA LC (J10) 1.5-2'' LIFT 1998-2007 B6 4600 REAR (without reservior)
Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Part Number: BIL 24-292757
BIL 24-292757 B6 4600 SERIES-SHOCK ABSORBER STOCK HEIGHT RAER(WITHOUT RESERVIOR)
/shop/product/bil-24-292757-bil-24-292757-b6-4600-series-shock-absorber-stock-height-raer-without-reservior-2077656.25 AED 409.63 AED 409.626 AED
625.00 AED
Product not available
Description:
TOYOTA LC 100 1998-2007 HA: KING SPEED: KSW B6 4600 REAR (without reservior)
Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Part Number: BNDL_BIL 24-292740_BIL 24-292757
SHOCK ABSORBER STOCK HEIGHT (WITHOUT RESERVIOR) B8 5100 SERIES- FRONT/REAR
/shop/product/bndl-bil-24-292740-bil-24-292757-shock-absorber-stock-height-without-reservior-b8-5100-series-front-rear-6875Description:
( BIL 24-292740) BIL 24-292740 B6 4600 SERIES-SHOCK ABSORBER STOCK HEIGHT FRONT (WITHOUT RESERVIOR)
TOYOTA / LAND CRUISER / 1998-2007
TOYOTA LC 100 1998-2007 VA: KING SPEED: KSW B6 4600 FRONT (without reservior) Product Description Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
( BIL 24-292757) BIL 24-292757 B6 4600 SERIES-SHOCK ABSORBER STOCK HEIGHT RAER(WITHOUT RESERVIOR)
TOYOTA / LAND CRUISER / 1998-2007
TOYOTA LC 100 1998-2007 HA: KING SPEED: KSW B6 4600 REAR (without reservior) Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Part Number: BNDL_BIL 24-027397_BIL 24-027403
SHOCK ABSORBER 1.5-2'' LIFT (WITHOUT RESERVIOR) B6 4600 - FRONT/REAR
/shop/product/bndl-bil-24-027397-bil-24-027403-shock-absorber-1-5-2-lift-without-reservior-b6-4600-front-rear-68732,260.65 AED 2,260.65 AED 2260.65 AED
2,153.00 AED
Product not available
Add to Cart
Description:
( BIL 24-027397) BIL 24-027397 B6 4600 - SHOCK ABSORBER 1.5-2'' LIFT FRONT (WITHOUT RESERVIOR)
TOYOTA / LAND CRUISER / 1998-2007
TOYOTA LC (J10) 1.5-2'' LIFT 1998-2007 B6 4600 FRONT (without reservior) Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
( BIL 24-027403) BIL 24-027403 B6 4600 - SHOCK ABSORBER 1.5-2'' LIFT REAR (WITHOUT RESERVIOR)
TOYOTA / LAND CRUISER / 1998-2007
TOYOTA LC (J10) 1.5-2'' LIFT 1998-2007 B6 4600 REAR (without reservior) Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Part Number: BNDL_BIL 24-214018_BIL 24-269049
SHOCK ABSORBER STOCK HEIGHT (WITHOUT RESERVIOR) B6 4600 - FRONT/REAR
/shop/product/bndl-bil-24-214018-bil-24-269049-shock-absorber-stock-height-without-reservior-b6-4600-front-rear-6874Description:
( BIL 24-269049) BIL 24-269049 B6 4600 - SHOCK ABSORBER STOCK HEIGHT REAR (WITHOUT RESERVIOR)
TOYOTA / LAND CRUISER / 2008-2019
TOYOTA LC 200 2008-2019 (V8) 1.5-2'' LIFT B6 4600 REAR HEIGHT ADJUSTABLE (without reservior) Product Description Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort. Finish Yellow Paint Reservoir No Body Design Smooth Body (Non-Coil over) Body Diameter46mm
( BIL 24-214018) BIL 24-214018 B6 4600 - SHOCK ABSORBER STOCK HEIGHT FRONT (WITHOUT RESERVIOR)
TOYOTA / LAND CRUISER / 2008-2019
TOYOTA LC 200 V8 2008-2019 (LC 200):V:B6 4600 FRONT (without reservior) Toyota Land Cruiser 2011-2008, Land Cruiser 2020-2013 Product Description Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Part Number: BNDL_4W-BM404932_4W-BM403041
SHOCKS 40mm ADJUSTABLE FRONT and REAR
/shop/product/bndl-4w-bm404932-4w-bm403041-shocks-40mm-adjustable-front-and-rear-7075Description:
( 4W-BM404932) FRONT 40mm ADJUSTABLE - STRUT TOYOTA LANDCRUISER 300 SERIES 2021-UP
TOYOTA LANDCRUISER 300 SERIES 2021-UP
The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimizing aeration and cavitation to maximize the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings *Representative Image Contents May Vary
( 4W-BM403041) REAR 40mm ADJUSTABLE - SHOCK ABSORBER TOYOTA LANDCRUISER 300 SERIES 2021-UP
TOYOTA LANDCRUISER 300 SERIES 2021-UP
The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimizing aeration and cavitation to maximize the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings *Representative Image Contents May Vary