SELECT YOUR VEHICLE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Featured Brands
suspension uae, suspension system, suspension dubai
30+ Years of high level experience | Always competent & successful
Wide range of products | Well respected by our clients
Part Number: 4W-4WAY-001
4W-4WAY-001 REPLACEMENT BUSHES
/shop/product/4w-4way-001-4w-4way-001-replacement-bushes-162261.16 AED 61.16 AED 61.1625 AED
58.25 AED
Product not available
Description:
Suits Bottom Front Eyering (Eyering Bonded Bushing)
Part Number: 4W-TDUB-020
4W-TDUB-020 U-BOLT KIT
/shop/product/4w-tdub-020-4w-tdub-020-u-bolt-kit-170689.25 AED 89.25 AED 89.25 AED
85.00 AED
Product not available
Description:
DESCRIPTION
When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs.
COMPATIBILITY
Jeep Cherokee 04/1984 - 2001 XJ Limited, Sport - REAR
Part Number: BNDL_4W-TDUK-1724/15
4W-TDUK-1724/15 URETHANE SPRING SPACER 15MM 2 X REAR
/shop/product/bndl-4w-tduk-1724-15-4w-tduk-1724-15-urethane-spring-spacer-15mm-2-x-rear-6883223.76 AED 223.76 AED 223.755 AED
213.10 AED
Product not available
Add to Cart
Description:
( 4W-TDUK-1724/15) 4W-TDUK-1724/15 URETHANE SPRING SPACER 15MM REAR
TOYOTA / LANDCRUISER / 1990-2007
DESCRIPTION When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs. SPECIFICATIONS 1 per coil as required COMPATIBILITY Toyota Landcruiser 03/1990 - 2007 80 and 105 Series - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 3in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 4in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 5in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 6in Lift - REAR Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR
Part Number: BNDL_4W-TDUK-1724/30
4W-TDUK-1724/30 URETHANE SPRING SPACER 30MM 2 X REAR
/shop/product/bndl-4w-tduk-1724-30-4w-tduk-1724-30-urethane-spring-spacer-30mm-2-x-rear-6884235.73 AED 235.73 AED 235.725 AED
224.50 AED
Product not available
Add to Cart
Description:
( 4W-TDUK-1724/30) 4W-TDUK-1724/30 URETHANE SPRING SPACER 30MM REAR
TOYOTA / LANDCRUISER / 1990-2007
DESCRIPTION When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs. SPECIFICATIONS 1 per coil as required COMPATIBILITY Toyota Landcruiser 03/1990 - 2007 80 and 105 Series - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 4in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 4in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 5in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 6in Lift - REAR Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR
Part Number: 4W-EXT5001
4W-EXT5001 STEERING STABILIZERS
/shop/product/4w-ext5001-4w-ext5001-steering-stabilizers-1652Description:
DESCRIPTION
The Tough Dog EXT steering damper is our affordable, heavy duty replacement damper.
Designed for mild applications as a replacement damper when the OEM gear just isn’t quite cutting the mustard, this damper will give you control and feeling back in your steering set up. With a 35mm internal bore and our Foam Cell insert to fight against fade in harsh use situations, this damper is the perfect companion for anyone looking to gain a new lease on life from their steering.
Superb road handling characteristics
35mm bore for heavy-duty use
Eliminate shimmy
Large range to suit most 4WD applications
H/Duty Replacement Damper
Part Number: 4W-TDC731
4W-TDC731 SPRING 25MM LIFT FRONT
/shop/product/4w-tdc731-4w-tdc731-spring-25mm-lift-front-1683383.25 AED 383.25 AED 383.25 AED
365.00 AED
Product not available
Description:
DESCRIPTION
Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world.
Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it.
Shot peened to relieve stress
Scragged and load tested
Formed on precision mandrels
Hot formed to maintain spring memory
Powder-coated for looks and corrosion resistance
E height up to 6” lift available
SPECIFICATIONS
25mm Lift Coil
COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) suits 2in Lift SWB w/Bar - FRONT
25Mm Lift Coil (Suit Swb With Alloy Bar)
Part Number: 4W-TDC974HH
4W-TDC974HH SPRING 40MM LIFT FRONT
/shop/product/4w-tdc974hh-4w-tdc974hh-spring-40mm-lift-front-1698390.34 AED 390.34 AED 390.3375 AED
371.75 AED
Product not available
Description:
SPECIFICATIONS
40mm Lift Spring
COMPATIBILITY
Toyota Fortuner 2004 - 12/2015 Petrol/Diesel/Bar - FRONT - 40mm Lift Spring Toyota Hilux 04/2005 - 2015 KUN26R (Coil/Leaf) Petrol/Diesel/Bar - FRONT - 40mm Lift Spring Toyota Prado 02/2003 - 2010 120 Series LWB and SWB Petrol/Diesel/Bar - FRONT - 40mm Lift Spring Toyota Prado 2010+ 150 Series SWB - Bar & Winch - FRONT - 40mm Lift Spring
Part Number: 4W-TDC771
4W-TDC771 SPRING 0-300KG LOAD 40MM REAR
/shop/product/4w-tdc771-4w-tdc771-spring-0-300kg-load-40mm-rear-1691Description:
DESCRIPTION
Designed in Australia, Tough Dog leaf springs offer a spring pack for just about any application you might require. Our springs are a proven performer in any situation.
Tough Dog leaf springs are a truly progressive rate leaf spring. Each leaf is set slightly higher than the leaf above so there is contact along the whole length of each leaf. There are single stage and two stage springs available for different applications. Primary and secondary stage leaves ensure that the vehicle’s ride remains uncompromised. As the spring is compressed under load, the heavier second stage leaves come into play to prevent excessive sag & remove high stresses from the primary stage.
Precision mandrel & die-formed
Oil quenched, hardened & tempered for maximum life.
Military wrap for safety
Accurately heat-treated
Manufactured from high grade spring steel
Anti-friction pads in most applications
Pre-stressed to maintain ride height
Diamond cut ends
Load rate tested
SPECIFICATIONS
40mm Lift Spring
COMPATIBILITY
Nissan Pathfinder 11/2005 - 2015 R51 - 2.5L, 4.0L - REAR - 40mm Lift Spring Nissan Pathfinder 11/2005 - 2015 R51 - 3.0L V6 - REAR - 40mm Lift Spring
Part Number: 4W-TDC732SL
4W-TDC732SL SPRING 25MM LIFT 0-300KG LOAD REAR
/shop/product/4w-tdc732sl-4w-tdc732sl-spring-25mm-lift-0-300kg-load-rear-1685390.34 AED 390.34 AED 390.3375 AED
371.75 AED
Product not available
Description:
DESCRIPTION
Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world.
Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it.
Shot peened to relieve stress
Scragged and load tested
Formed on precision mandrels
Hot formed to maintain spring memory
Powder-coated for looks and corrosion resistance
E height up to 6” lift available
SPECIFICATIONS
25mm Lift Spring
COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift LWB - REAR
25Mm Lift 0-300Kg Load (Suit Lwb)
Part Number: 4W-TDC339
4W-TDC339 LWD SPRINGS 300KG LOAD SWB 40MM LIFT REAR
/shop/product/4w-tdc339-4w-tdc339-lwd-springs-300kg-load-swb-40mm-lift-rear-1678390.34 AED 390.34 AED 390.3375 AED
371.75 AED
Product not available
Description:
Constant 300Kg Load Swb (40Mm Lift (Also 0-300Kg For Lwb))
Tough Dog rear springs with 40mm raised height. (sold in pairs)
The Tough Dog coil springs are designed and manufactured in Australia, and in most cases use the new generation X5K steel in the manufacturing process. An extremely high quality coil spring.
Part Number: BNDL_4W-TDUK-1734/30_4W-TDUK-1736/30
URETHANE SPRING SPACER 30MM - FRONT/REAR
/shop/product/bndl-4w-tduk-1734-30-4w-tduk-1736-30-urethane-spring-spacer-30mm-front-rear-6798425.25 AED 425.25 AED 425.25 AED
405.00 AED
Product not available
Add to Cart
Description:
( 4W-TDUK-1734/30) 4W-TDUK-1734/30 URETHANE SPRING SPACER 30MM FRONT
NISSAN / PATROL / 1997-2016
DESCRIPTION When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs. SPECIFICATIONS 1 required per coil as required. COMPATIBILITY Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) - 2in Lift - FRONT Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Leaf) - FRONT Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Coil) - FRONT
( 4W-TDUK-1736/30) 4W-TDUK-1736/30 URETHANE SPRING SPACER 30MM REAR
NISSAN / PATROL / 1997-2016
DESCRIPTION When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs. SPECIFICATIONS 1 required per coil as required COMPATIBILITY Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 2in Lift - REAR Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Coil) - REAR
Part Number: 4W-TDC734L
4W-TDC734L SPRING 50MM LIFT FRONT
/shop/product/4w-tdc734l-4w-tdc734l-spring-50mm-lift-front-1687452.55 AED 452.55 AED 452.55 AED
431.00 AED
Product not available
Description:
DESCRIPTION
Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world.
Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it.
Shot peened to relieve stress
Scragged and load tested
Formed on precision mandrels
Hot formed to maintain spring memory
Powder-coated for looks and corrosion resistance
E height up to 6” lift available
SPECIFICATIONS
50mm Lift Coil
COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift LWB up to Bullbar - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) - 2in Lift LWB up to Bullbar - FRONT Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Leaf) suit up to Bullbar - FRONT Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Coil) suit up to Bullbar - FRONT Nissan Patrol 1988 - 2015 Y60/Y61 (GQ, GU) - Armoured B2-110kg, B3-150kg, B4-240kg - FRONT
50Mm Lift Coil ( Suit Lwb Up To Bulbar)
Part Number: 4W-TDUK-052
4W-TDUK-052 COMPONENTS TRAILING ARM BUSHING KIT
/shop/product/4w-tduk-052-4w-tduk-052-components-trailing-arm-bushing-kit-1708455.18 AED 455.18 AED 455.175 AED
433.50 AED
Product not available
Description:
DESCRIPTION
When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs.
SPECIFICATIONS
2 Kits required Upper & Lower
COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 2in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 3in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 3in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 4in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 4in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 5in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 5in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 6in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 6in Lift - REAR Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Coil) - REAR
Part Number: 4W-EXT5613
4W-EXT5613 STEERING STABILIZERS
/shop/product/4w-ext5613-4w-ext5613-steering-stabilizers-4530Description:
The Tough Dog EXT steering damper is our affordable, heavy duty replacement damper.
Designed for mild applications as a replacement damper when the OEM gear just isn’t quite cutting the mustard, this damper will give you control and feeling back in your steering set up. With a 35mm internal bore and our Foam Cell insert to fight against fade in harsh use situations, this damper is the perfect companion for anyone looking to gain a new lease on life from their steering.
uperb road handling characteristics
35mm bore for heavy-duty use
Eliminate shimmy
Large range to suit most 4WD applications
Part Number: 4W-SS5922-P/S
4W-SS5922-P/S STEERING DAMPERS
/shop/product/4w-ss5922-p-s-4w-ss5922-p-s-steering-dampers-1673472.50 AED 472.50 AED 472.5 AED
450.00 AED
Product not available
Description:
DESCRIPTION
SS5922-P/S 4X4 Steering Damper Tough Dog suits Jeep Grand Cherokee ZG ZJ
Tough Dog Coil Over Return to Centre 4x4 Steering Dampener
Official Tough Dog Dealer.
This Tough Dog RTC (Return to Centre) Steering Stabilizer is a great improvement in the steering performance of your 4x4. A must for anyone going offroad or fitting larger tyres.
Product Type: Tough Dog - Steering Damper
Part Number: 4W-FC41206
4W-FC41206 SHOCKS 41MM FOAM CELL REAR
/shop/product/4w-fc41206-4w-fc41206-shocks-41mm-foam-cell-rear-1667472.50 AED 472.50 AED 472.5 AED
450.00 AED
Product not available
Description:
Description
Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application.
The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade.
Large 41mm internal bore
Twin tube design
High temperature, all weather oil
18mm, double chrome-plated rod
Additional welding on all studs & eyerings
Multi stage Velocity Sensitive Valving
Rod wiper seal and multi lip seal
Hydraulic rebound stop
Part Number: 4W-EXT5617
4W-EXT5617 STEERING STABILIZERS
/shop/product/4w-ext5617-4w-ext5617-steering-stabilizers-1653Description:
DESCRIPTION
EXT5617 Tough Dog Steering Damper
Extra Heavy Duty Foam Cell Steering Damper
Official Tough Dealer.
Designed as a replacement damper for when OEM gear just isn’t quite cutting the mustard.
This damper will give you back control and feeling in your steering set up.
35mm internal bore and Foam Cell insert resists fade in hard use situations.
Product Type: Tough Dog - Steering Damper
Part Number: 4W-FC404400
4W-FC404400 SHOCKS 40MM FOAM CELL FRONT
/shop/product/4w-fc404400-4w-fc404400-shocks-40mm-foam-cell-front-1655Description:
Description
Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application.
The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade.
Large 41mm internal bore
Twin tube design
High temperature, all weather oil
18mm, double chrome-plated rod
Additional welding on all studs & eyerings
Multi stage Velocity Sensitive Valving
Rod wiper seal and multi lip seal
Hydraulic rebound stop
Fitment Note for use with Prado 120 Grande:
Aftermarket replacement strut will eliminate the factory electronic shock control.
Part Number: 4W-BM401116
4W-BM401116 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR
/shop/product/4w-bm401116-4w-bm401116-shocks-40mm-9-stage-adjustable-rear-1630Description:
Description
The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application.
In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications.
40mm internal bore
60mm external casing
18mm chrome-plated rod
High temperature, all weather oil
Foam cell
9 Stage external adjustment
Additional welding on all studs and eye rings
40Mm 9 Stage Adjustable (40Mm Lift)
Part Number: 4W-SV5617
4W-SV5617 STEERING STABILIZERS 9 STAGE ADJUSTABLE DAMPER
/shop/product/4w-sv5617-4w-sv5617-steering-stabilizers-9-stage-adjustable-damper-4533Description:
DESCRIPTION
SV5617 4X4 Steering Damper Tough Dog suits Nissan Patrol GU Y61
Official Tough Dog Dealer.
TOUGH DOG's award winning SV Adjustable Steering Stabilizer
Featuring "9 Stage Adjustable Valve" for the Ultimate in Steering Control
* 22mm Chrome Rod with 35mm Bore
* Reinforced welding on pins and eyerings
Another world first for ToughDog.
Product Type: Tough Dog - Steering Damper
Part Number: 4W-BM401463
4W-BM401463 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR
/shop/product/4w-bm401463-4w-bm401463-shocks-40mm-9-stage-adjustable-rear-1635Description:
Description
The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application.
In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications.
40mm internal bore
60mm external casing
18mm chrome-plated rod
High temperature, all weather oil
Foam cell
9 Stage external adjustment
Additional welding on all studs and eye rings
40Mm 9 Stage Adjustable Shock (Suits 40Mm Lift )
Part Number: 4W-FC404900
4W-FC404900 SHOCKS 40MM FOAM CELL FRONT
/shop/product/4w-fc404900-4w-fc404900-shocks-40mm-foam-cell-front-1660643.65 AED 643.65 AED 643.65 AED
613.00 AED
Product not available
Description:
DESCRIPTION
Front Set of 2 Shock Absorber Tough Dog
Pair of 41mm Bore Foam Cell Strut Shock Absorbers
Official Tough Dog Dealer.
Tough Dog Foam Cell shocks are a large bore shock, (41mm) that are built for heavy-duty use and for coil sprung vehicles. The use of micro-cellular foam inserts has produced a new breed of shocks, which are more resistant to fade.
Part Number: BNDL_4W-TDC632L
4W-TDC632L SPRING CONSTANT 300KG LOAD 35MM LIFT 2 X REAR
/shop/product/bndl-4w-tdc632l-4w-tdc632l-spring-constant-300kg-load-35mm-lift-2-x-rear-6886754.43 AED 754.43 AED 754.425 AED
718.50 AED
Product not available
Add to Cart
Description:
( 4W-TDC632L) 4W-TDC632L SPRING CONSTANT 300KG LOAD 35MM LIFT REAR
MITSUBISHI / CHALLENGER / 2000-2007
DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 40mm Lift Spring COMPATIBILITY Mitsubishi Pajero 8/1988 - 1991 (NF-NG) and 5/1991 - 2000 (NH-NL) Coil Rear - REAR
Part Number: 4W-BM404400
4W-BM404400 SHOCKS 40MM ADJUSTABLE FRONT
/shop/product/4w-bm404400-4w-bm404400-shocks-40mm-adjustable-front-1636Description:
PRODUCT DESCRIPTION
Features
40mm internal bore
60mm ernal casing
18mm Chrome plated rod
High temperature fluid
Foam cell
9 Stage ernal adjustment
Additional welding on all studs and eyerings
40Mm Adjustable Strut
Part Number: 4W-TDPR-003
4W-TDPR-003 ADJUSTABLE PANHARD ROD REAR
/shop/product/4w-tdpr-003-4w-tdpr-003-adjustable-panhard-rod-rear-4536Description:
DESCRIPTION
Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights.
COMPATIBILITY
Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR
Part Number: 4W-TDPR-200
4W-TDPR-200 ADJUSTABLE PANHARD ROD REAR
/shop/product/4w-tdpr-200-4w-tdpr-200-adjustable-panhard-rod-rear-1701Description:
DESCRIPTION
Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights.
Part Number: BNDL_4W-TDR1114
4W-TDR1114 SHOCK ABSORBERS 53MM NON ADJUSTABLE 2 X REAR
/shop/product/bndl-4w-tdr1114-4w-tdr1114-shock-absorbers-53mm-non-adjustable-2-x-rear-68821,372.88 AED 1,372.88 AED 1372.875 AED
1,307.50 AED
Product not available
Add to Cart
Description:
( 4W-TDR1114) 4W-TDR1114 SHOCK ABSORBERS 53MM NON ADJUSTABLE REAR
TOYOTA / LANDCRUISER / 1998-UP
DESCRIPTION The Tough Dog ‘Ralph’ shock is the largest 4WD shock on the market. We redesigned shocks originally intended for prime movers to suit 4WD applications. The Ralph shock has a massive 53mm bore and 22mm chrome piston rod, all housed in a 70mm casing. These big dogs carry so much oil, they will run cool over even the toughest of terrain. If you drive a fully laden off road tourer, these are the shocks for you. Huge 53mm bore Twin tube design High temperature, all weather oil 22mm double chrome-plated rod Additional welding on all studs & eye rings Multi stage Velocity Sensitive Valving Rod wiper seal and multi lip seal Hydraulic rebound stop COMPATIBILITY Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR - suits up to 25mm Lift Toyota Landcruiser 11/2007+ 200 Series - REAR - suits up to 20mm Lift Toyota Landcruiser 11/2007+ 200 Series - Armoured - REAR - suits up to 20mm Lift
Part Number: BNDL_4W-TDC734SL_4W-TDC742SL
SPRING 25MM LIFT 0-300KG LOAD - FRONT/REAR
/shop/product/bndl-4w-tdc734sl-4w-tdc742sl-spring-25mm-lift-0-300kg-load-front-rear-6794Description:
( 4W-TDC734SL) 4W-TDC734SL SPRING 25MM LIFT FRONT
NISSAN / PATROL / 1997-2016
DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 25mm Lift Coil COMPATIBILITY Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift LWB up to Bullbar - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) - 2in Lift LWB up to Bullbar - FRONT
( 4W-TDC742SL) 4W-TDC742SL SPRING 25MM LIFT 0-300KG LOAD REAR
NISSAN / PATROL / 1997-2016
Shot Peened To Relieve Stress, Cragged And Load Tested, Formed On Precision Mandrels, Accurate Heat Treatment To Ensure The Spring Performs As Designed, Powder-Coated For Looks And Corrosion Resistance,O.E Height Up To 6 Lift Available, New Generation X5K Steel Used In Most Applications.
Part Number: 4W-TDSB-006
4W-TDSB-006 33mm Sway Bar REAR
/shop/product/4w-tdsb-006-4w-tdsb-006-33mm-sway-bar-rear-17031,512.53 AED 1,512.53 AED 1512.525 AED
1,440.50 AED
Product not available
Description:
DESCRIPTION
Designed to reduce tail shaft angle and remove driveline vibration that arises from an out-of-phase drivetrain. The universal joints in a vehicle’s tailshaft must operate at the same angle to operate harmoniously. If the angle of one universal joint is different to the other, or the universal joints are forced to operate on an angle larger that within tolerance, the resulting vibration can be felt through the vehicle when driven. To restore the universal joints to harmony, Tough Dog spacer kits are available for vehicles that commonly suffer from vibration.
COMPATIBILITY
Part Number: BNDL_4W-TDC354_4W-TDC355
SPRING 40mm Lift FRONT - 0-300KG LOAD 45MM LIFT REAR
/shop/product/bndl-4w-tdc354-4w-tdc355-spring-40mm-lift-front-0-300kg-load-45mm-lift-rear-68171,533.00 AED 829.50 AED 829.5 AED
1,460.00 AED
Product not available
Add to Cart
Description:
( 4W-TDC354) Tough Dog 50mm Raised Height Front Springs (TDC354)
JEEP / WRANGLER / 1996-2007
DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 40mm Lift Spring Suits up to Bullbar (45mm Lift) COMPATIBILITY Jeep Wrangler 10/1996 - 2007 TJ Up to Bullbar - FRONT - 45mm Lift
( 4W-TDC355) 4W-TDC355 SPRINGS 0-300KG LOAD 45MM LIFT REAR
JEEP / WRANGLER / 1996-2007
Tough Dog rear springs with 45mm raised height. (sold in pairs) The Tough Dog coil springs are designed and manufactured in Australia, and in most cases use the new generation X5K steel in the manufacturing process. An extremely high quality coil spring 0-300Kg Load (45Mm Lift)
Part Number: BNDL_4W-TDC731_4W-TDC733
SPRING 25MM LIFT 0-300KG LOAD - FRONT/REAR
/shop/product/bndl-4w-tdc731-4w-tdc733-spring-25mm-lift-0-300kg-load-front-rear-67931,533.00 AED 1,533.00 AED 1533.0 AED
1,460.00 AED
Product not available
Add to Cart
Description:
( 4W-TDC731) 4W-TDC731 SPRING 25MM LIFT FRONT
NISSAN / PATROL / 1988-1998
DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 25mm Lift Coil COMPATIBILITY Nissan Patrol 02/1988 - 1998 GQ (Y60) suits 2in Lift SWB w/Bar - FRONT 25Mm Lift Coil (Suit Swb With Alloy Bar)
( 4W-TDC733) 4W-TDC733 SPRING 25MM LIFT 0-300KG LOAD REAR
NISSAN / PATROL / 1988-1998
DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 25mm Lift Spring COMPATIBILITY Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift - SWB - REAR 25Mm Lift 0-300Kg Load ( Suit Swb)
Part Number: BNDL_4W-BD1133TB_4W-BD1192TB
SHOCK NITRO GAS 35MM NON ADJUSTABLE FRONT-REAR
/shop/product/bndl-4w-bd1133tb-4w-bd1192tb-shock-nitro-gas-35mm-non-adjustable-front-rear-6821Description:
( 4W-BD1133TB) 4W-BD1133TB SHOCKS 35MM NITRO GAS FRONT
SUZUKI / JIMNY / 1998-2018
Tough Dog front shock absorbers with 35mm gas shocks are suitable for standard to 40mm raised height suspension. (sold in pairs) The Tough Dog 35mm Gas Shock Absorbers have been designed with comfort and control in mind, equipped with velocity sensitive valving they will adjust automatically to road conditions. Ideal for light and medium duty 4WD's. Features include: * 35mm bore size. * Low pressure gas design for comfort and reduced fade. * Double chrome plated shaft. * High temperature resistant fluid. * Standard and long travel options.
( 4W-BD1192TB) 4W-BD1192TB SHOCKS 35MM NITRO GAS REAR
SUZUKI / JIMNY / 1998-2018
Tough Dog rear shock absorbers with 35mm gas shocks are suitable for standard to 40mm raised height suspension. (sold in pairs) The Tough Dog 35mm Gas Shock Absorbers have been designed with comfort and control in mind, equipped with velocity sensitive valving they will adjust automatically to road conditions. Ideal for light and medium duty 4WD's. Features include: * 35mm bore size. * Low pressure gas design for comfort and reduced fade. * Double chrome plated shaft. * High temperature resistant fluid. * Standard and long travel options.
Part Number: BNDL_4W-TDC790L_4W-TDC795
SPRING 40MM LIFT 0-120KG LOAD - FRONT/REAR
/shop/product/bndl-4w-tdc790l-4w-tdc795-spring-40mm-lift-0-120kg-load-front-rear-67951,821.75 AED 1,821.75 AED 1821.75 AED
1,735.00 AED
Product not available
Add to Cart
Description:
( 4W-TDC790L) 4W-TDC790L SPRING 2 40MM LIFT FRONT
NISSAN / PATROL / 2013-UP
DESCRIPTION Designed in Australia, Tough Dog leaf springs offer a spring pack for just about any application you might require. Our springs are a proven performer in any situation. Tough Dog leaf springs are a truly progressive rate leaf spring. Each leaf is set slightly higher than the leaf above so there is contact along the whole length of each leaf. There are single stage and two stage springs available for different applications. Primary and secondary stage leaves ensure that the vehicle’s ride remains uncompromised. As the spring is compressed under load, the heavier second stage leaves come into play to prevent excessive sag & remove high stresses from the primary stage. Precision mandrel & die-formed Oil quenched, hardened & tempered for maximum life. Military wrap for safety Accurately heat-treated Manufactured from high grade spring steel Anti-friction pads in most applications Pre-stressed to maintain ride height Diamond cut ends Load rate tested SPECIFICATIONS 40mm Lift Spring COMPATIBILITY Nissan Patrol 2010+ Y62 (Non Hydraulic Suspension only) Petrol w/Bar - FRONT
( 4W-TDC795) 4W-TDC795 SPRING 0-120KG LOAD 40MM REAR
NISSAN / PATROL / 2013-UP
DESCRIPTION Designed in Australia, Tough Dog leaf springs offer a spring pack for just about any application you might require. Our springs are a proven performer in any situation. Tough Dog leaf springs are a truly progressive rate leaf spring. Each leaf is set slightly higher than the leaf above so there is contact along the whole length of each leaf. There are single stage and two stage springs available for different applications. Primary and secondary stage leaves ensure that the vehicle’s ride remains uncompromised. As the spring is compressed under load, the heavier second stage leaves come into play to prevent excessive sag & remove high stresses from the primary stage. Precision mandrel & die-formed Oil quenched, hardened & tempered for maximum life. Military wrap for safety Accurately heat-treated Manufactured from high grade spring steel Anti-friction pads in most applications Pre-stressed to maintain ride height Diamond cut ends Load rate tested SPECIFICATIONS 40mm Lift Spring COMPATIBILITY Nissan Patrol 2010+ Y62 (Non Hydraulic Suspension only) - REAR
Part Number: BNDL_4W-BD1068T_4W-BD1443T
SHOCK NITRO GAS 35MM NON ADJUSTABLE FRONT-REAR
/shop/product/bndl-4w-bd1068t-4w-bd1443t-shock-nitro-gas-35mm-non-adjustable-front-rear-68161,890.00 AED 829.50 AED 829.5 AED
1,800.00 AED
Product not available
Add to Cart
Description:
( 4W-BD1068T) 4W-BD1068T SHOCKS 35MM NITRO GAS FRONT
JEEP / WRANGLER / 1996-2007
35Mm Nitro Gas Shock Absorber Tough Dog front 35mm twin tube nitrogen Gas shock absorbers which are suitable for standard to 35mm raised height. (sold in pairs) The Tough Dog 35mm Gas Shock Absorbers have been designed with comfort and control in mind, equipped with velocity sensitive valving they will adjust automatically to road conditions. Ideal for light and medium duty 4WD's Features include: * 35mm bore size. * Low pressure gas design for comfort and reduced fade. * Double chrome plated shaft. * High temperature resistant fluid. * Standard and long travel options. * Weight: 3.0 kg
( 4W-BD1443T) 4W-BD1443T SHOCKS 35MM NITRO GAS REAR
JEEP / WRANGLER / 1996-2007
PRODUCT DESCRIPTION Features 35mm Internal Bore and piston with twin tube design Low Pressure Nitrogen Gas to eliminate fade for better performance and comfortable ride Double chrome-plated shaft High temperature resistant fluid Custom made for each 4WD up to Hilux size OEM or longer length shocks to suit standard or raised 4WD for maximum articulation, comfort safety & durability
Part Number: BNDL_4W-TDPR-016_4W-TDPR-013
PANHARD ROD - ADJUSTABLE - FRONT/REAR
/shop/product/bndl-4w-tdpr-016-4w-tdpr-013-panhard-rod-adjustable-front-rear-6792Description:
( 4W-TDPR-016) 4W-TDPR-016 ADJUSTABLE PANHARD ROD FRONT
NISSAN / PATROL / 1997-2016
DESCRIPTION Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights. COMPATIBILITY Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 2in Lift - Suits LHD Only - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 3in Lift - Suits LHD Only - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 4in Lift - Suits LHD Only - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 5in Lift - Suits LHD Only - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 6in Lift - Suits LHD Only - FRONT
( 4W-TDPR-013) Adjustable Panhard Rod - Rear (Patrol GU Wagon) NISSAN PATROL Y61
NISSAN / Patrol / 1997 - 2016
DESCRIPTION Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights. COMPATIBILITY Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 2in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 3in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 4in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 5in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 6in Lift - REAR
Part Number: BNDL_4W-FC404400_4W-FC41116
SHOCKS 40MM FOAM CELL - NON ADJUSTABLE - FRONT/REAR
/shop/product/bndl-4w-fc404400-4w-fc41116-shocks-40mm-foam-cell-non-adjustable-front-rear-6802Description:
( 4W-FC404400) 4W-FC404400 SHOCKS 40MM FOAM CELL FRONT
TOYOTA / FJ CRUISER / 2011-2016
Description Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application. The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade. Large 41mm internal bore Twin tube design High temperature, all weather oil 18mm, double chrome-plated rod Additional welding on all studs & eyerings Multi stage Velocity Sensitive Valving Rod wiper seal and multi lip seal Hydraulic rebound stop Fitment Note for use with Prado 120 Grande: Aftermarket replacement strut will eliminate the factory electronic shock control.
( 4W-FC41116) 4W-FC41116 SHOCK 41MM FOAM CELL REAR
TOYOTA / FJ CRUISER / 2011-2016
Description Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application. The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade. Large 41mm internal bore Twin tube design High temperature, all weather oil 18mm, double chrome-plated rod Additional welding on all studs & eyerings Multi stage Velocity Sensitive Valving Rod wiper seal and multi lip seal Hydraulic rebound stop
Part Number: BNDL_4W-FC401220_4W-FC404750
SHOCKS 41MM FOAM CELL - NON ADJUSTABLE - FRONT/REAR
/shop/product/bndl-4w-fc401220-4w-fc404750-shocks-41mm-foam-cell-non-adjustable-front-rear-67892,059.16 AED 1,732.50 AED 1732.5 AED
1,961.10 AED
Product not available
Add to Cart
Description:
( 4W-FC401220) 4W-FC401220 SHOCKS 41MM FOAM CELL REAR
NISSAN / PATROL / 2013-UP
Description These tough puppies are the largest bore externally adjustable shocks available on the market. There is nothing that can compare to the 45mm bore in a 70mm outer casing. This is one serious shock. The 9 stages of adjustment mean you can control the firmness of your shocks easily, and adapt to the conditions as required. Choose a firmer ride for your highway travels, and then dial them down when it’s time to get down to business. 45mm big bore adjustables are designed for big lift applications up to six inches over factory in some vehicles. Our adjustable shocks are built tough for the Aussie outback. As well as the Foam Cell insert to combat shock fade, the 45mm adjustable also incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. Our big bore shocks also have a DU bushing fitted internally to protect the seals from damage caused by side load at full extension. 45mm internal bore 70mm external casing 22mm chrome plated rod High temperature, all weather oil Foam cell technology 9 Stage external adjustment Additional welding on all studs and eyerings 41Mm Foam Cell Shock ( Up To 40Mm Lift)
( 4W-FC404750) 4W-FC404750 SHOCKS 40MM FOAM CELL FRONT
NISSAN / PATROL / 2013-UP
DESCRIPTION Front Set of 2 Shock Absorber Tough Dog Pair of 41mm Bore Foam Cell Strut Shock Absorbers Official Tough Dog Dealer. Tough Dog Foam Cell shocks are a large bore shock, (41mm) that are built for heavy-duty use and for coil sprung vehicles. The use of micro-cellular foam inserts has produced a new breed of shocks, which are more resistant to fade.
Part Number: BNDL_4W-FC404910_4W-FC41117
SHOCKS 40MM FOAM CELL - NON ADJUSTABLE - FRONT/REAR
/shop/product/bndl-4w-fc404910-4w-fc41117-shocks-40mm-foam-cell-non-adjustable-front-rear-6813Description:
( 4W-FC404910) 4W-FC404910 SHOCKS 40MM FOAM CELL FRONT
TOYOTA / TUNDRA / 2007-UP
DESCRIPTION Pair of Shock Absorbers (Tough Dog) Pair of 41mm Bore Foam Cell Strut Shock Absorbers Official Tough Dog Dealer. Tough Dog Foam Cell shocks are a large bore shock, (41mm) that are built for heavy-duty use and for coil sprung vehicles. The use of micro-cellular foam inserts has produced a new breed of shocks, which are more resistant to fade. Product Type: Tough Dog - Shock Absorber
( 4W-FC41117) 4W-FC41117 SHOCKS 41MM FOAM CELL REAR
TOYOTA / TUNDRA / 2007-UP
DESCRIPTION Pair of Shock Absorbers (Tough Dog) Pair of 41mm Bore Foam Cell Shock Absorbers Official Tough Dog Dealer. Tough Dog Foam Cell shocks are a large bore shock, (41mm) that are built for heavy-duty use and for coil sprung vehicles. The use of micro-cellular foam inserts has produced a new breed of shocks, which are more resistant to fade. Product Type: Tough Dog - Shock Absorber
Part Number: 4W-TDCA-004
Tough Dog TDCA-004 Front Control Arm - Upper Arm (Landcruiser 200 Series)
/shop/product/4w-tdca-004-tough-dog-tdca-004-front-control-arm-upper-arm-landcruiser-200-series-69872,181.90 AED 2,181.90 AED 2181.9 AED
2,078.00 AED
Product not available
Description:
Part Number: BNDL_4W-BM401069_4W-BM401463
SHOCKS 40MM 9 STAGE - ADJUSTABLE - FRONT/REAR
/shop/product/bndl-4w-bm401069-4w-bm401463-shocks-40mm-9-stage-adjustable-front-rear-6815Description:
( 4W-BM401069) 4W-BM401069 SHOCKS 40MM ADJUSTABLE FRONT
JEEP / WRANGLER / 2007-2018
Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings 40Mm Adjustable Shock (Suits Up To 40Mm Lift)
( 4W-BM401463) 4W-BM401463 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR
JEEP / WRANGLER / 2007-2018
Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings 40Mm 9 Stage Adjustable Shock (Suits 40Mm Lift )
Part Number: BNDL_4W-FC404932_4W-FC43041
40mm ADJUSTABLE SHOCK ABSORBER FRONT and REAR
/shop/product/bndl-4w-fc404932-4w-fc43041-40mm-adjustable-shock-absorber-front-and-rear-70772,397.15 AED 2,397.15 AED 2397.15 AED
2,283.00 AED
Product not available
Add to Cart
Description:
( 4W-FC404932) FRONT Up to 40mm Lift - STRUT Only FOAM CELL TOYOTA LANDCRUISER 300 SERIES 2021-UP
TOYOTA LANDCRUISER 300 SERIES 2021-UP
Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application. The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade. Large 40mm internal bore Twin tube design High temperature, all weather oil 18mm, double chrome-plated rod Additional welding on all studs & eyerings Multi stage Velocity Sensitive Valving Rod wiper seal and multi lip seal Hydraulic rebound stop *Representative Image Contents May Vary
( 4W-FC43041) REAR 35mm Lift FOAM CELL - SHOCK ABSORBER TOYOTA LANDCRUISER 300 SERIES 2021-UP
TOYOTA LANDCRUISER 300 SERIES 2021-UP
Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application. The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade. Large 41mm internal bore Twin tube design High temperature, all weather oil 18mm, double chrome-plated rod Additional welding on all studs & eyerings Multi stage Velocity Sensitive Valving Rod wiper seal and multi lip seal Hydraulic rebound stop *Representative Image Contents May Vary
Part Number: BNDL_4W-BM401050_4W-BM401377
2x 40MM 9 STAGE ADJUSTABLE UPTO 50MM FRONT And 2x REAR Stocks for Landcruiser 71,74 SERIES
/shop/product/bndl-4w-bm401050-4w-bm401377-2x-40mm-9-stage-adjustable-upto-50mm-front-and-2x-rear-stocks-for-landcruiser-71-74-series-7052Description:
( 4W-BM401377) 40mm 9 Stage Adjustable REAR Shocks (Landcruiser 71-79 Series)
TOYOTALANDCRUISER - 71, 74 SERIES - HZJ71 & HZJ74
DESCRIPTION The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with our Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Our adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings SPECIFICATIONS 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota 4Runner 11/1985 - 1989 IFS with Leaf Rear 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Hilux 11/1983 - 1997 Leaf/Leaf 4WD 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Hilux 10/1988 - 1997 Torsion Bar Front 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Hilux 10/1997 - 2005 Torsion Bar Front 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Landcruiser HZJ71 and HZJ74 71, 74 Series SWB and LWB 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Landcruiser 11/1984 - 1992 70, 73, 74 Series 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Landcruiser 11/1984 - 1999 75 Series 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits up to 50mm Lift - Toyota Landcruiser 2007+ 76 Series Wagon 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits up to 50mm Lift - Toyota Landcruiser 1993 -1999 77 Series FZJ77, HZJ77, PZJ77 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits up to 50mm Lift - Toyota Landcruiser 10/1999+ 78, 79 Series inc V8 (Except Dual Cab) 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits up to 50mm Lift - Toyota Landcruiser 2012+ 79 Series Dual Cab COMPATIBILITY Toyota 4Runner 11/1985 - 1989 IFS with Leaf Rear Toyota Hilux 11/1983 - 1997 Leaf/Leaf 4WD Toyota Hilux 10/1988 - 1997 Torsion Bar Front Toyota Hilux 10/1997 - 2005 Torsion Bar Front Toyota Landcruiser HZJ71 and HZJ74 71, 74 Series SWB and LWB Toyota Landcruiser 11/1984 - 1992 70, 73, 74 Series Toyota Landcruiser 11/1984 - 1999 75 Series Toyota Landcruiser 2007+ 76 Series Wagon Toyota Landcruiser 1993 -1999 77 Series FZJ77, HZJ77, PZJ77 Toyota Landcruiser 10/1999+ 78, 79 Series inc V8 (Except Dual Cab) Toyota Landcruiser 2012+ 79 Series Dual Cab
( 4W-BM401050) 40mm 9 Stage Adjustable Front Shocks (Landcruiser 71-79 Series)
LAND CRUISER 71,74 SERIES
DESCRIPTION The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with our Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Our adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings SPECIFICATIONS 2x FRONT 40mm 9 Stage Adjustable Shock Absorbers - suit up to 50mm Lift - Toyota Landcruiser HZJ71 and HZJ74 71, 74 Series SWB and LWB 2x FRONT 40mm 9 Stage Adjustable Shock Absorbers - suit up to 50mm Lift - Toyota Landcruiser 2007+ 76 Series Wagon 2x FRONT 40mm 9 Stage Adjustable Shock Absorbers - suit up to 50mm Lift - Toyota Landcruiser 10/1999+ 78, 79 Series inc V8 (Except Dual Cab) 2x FRONT 40mm 9 Stage Adjustable Shock Absorbers - suit up to 50mm Lift - Toyota Landcruiser 2012+ 79 Series Dual Cab COMPATIBILITY Toyota Landcruiser HZJ71 and HZJ74 71, 74 Series SWB and LWB Toyota Landcruiser 2007+ 76 Series Wagon Toyota Landcruiser 10/1999+ 78, 79 Series inc V8 (Except Dual Cab) Toyota Landcruiser 2012+ 79 Series Dual Cab
Part Number: BNDL_4W-BM401047_4W-BM401206
SHOCKS 40MM 9 STAGE - ADJUSTABLE - FRONT/REAR
/shop/product/bndl-4w-bm401047-4w-bm401206-shocks-40mm-9-stage-adjustable-front-rear-6752Description:
( 4W-BM401047) 4W-BM401047 SHOCKS 40MM 9 STAGE ADJUSTABLE FRONT
NISSAN / PATROL / 1997-2016
Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings *Representative Image Contents May Vary
( 4W-BM401206) 4W-BM401206 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR
NISSAN / PATROL / 1997-2016
Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings