Suits Bottom Front Eyering (Eyering Bonded Bushing)

DESCRIPTION
When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs.

COMPATIBILITY
Jeep Cherokee 04/1984 - 2001 XJ Limited, Sport - REAR

( 4W-TDUK-1724/15) 4W-TDUK-1724/15 URETHANE SPRING SPACER 15MM REAR

TOYOTA / LANDCRUISER / 1990-2007

DESCRIPTION When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs. SPECIFICATIONS 1 per coil as required COMPATIBILITY Toyota Landcruiser 03/1990 - 2007 80 and 105 Series - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 3in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 4in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 5in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 6in Lift - REAR Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR

( 4W-TDUK-1724/30) 4W-TDUK-1724/30 URETHANE SPRING SPACER 30MM REAR

TOYOTA / LANDCRUISER / 1990-2007

DESCRIPTION When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs. SPECIFICATIONS 1 per coil as required COMPATIBILITY Toyota Landcruiser 03/1990 - 2007 80 and 105 Series - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 4in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 4in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 5in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 6in Lift - REAR Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR

DESCRIPTION
The Tough Dog EXT steering damper is our affordable, heavy duty replacement damper.
Designed for mild applications as a replacement damper when the OEM gear just isn’t quite cutting the mustard, this damper will give you control and feeling back in your steering set up. With a 35mm internal bore and our Foam Cell insert to fight against fade in harsh use situations, this damper is the perfect companion for anyone looking to gain a new lease on life from their steering.

Superb road handling characteristics
35mm bore for heavy-duty use
Eliminate shimmy
Large range to suit most 4WD applications

H/Duty Replacement Damper

DESCRIPTION
Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world.

Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it.

Shot peened to relieve stress
Scragged and load tested
Formed on precision mandrels
Hot formed to maintain spring memory
Powder-coated for looks and corrosion resistance
E height up to 6” lift available

SPECIFICATIONS
25mm Lift Coil

COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) suits 2in Lift SWB w/Bar - FRONT

25Mm Lift Coil (Suit Swb With Alloy Bar)

SPECIFICATIONS
40mm Lift Spring

COMPATIBILITY
Toyota Fortuner 2004 - 12/2015 Petrol/Diesel/Bar - FRONT - 40mm Lift Spring Toyota Hilux 04/2005 - 2015 KUN26R (Coil/Leaf) Petrol/Diesel/Bar - FRONT - 40mm Lift Spring Toyota Prado 02/2003 - 2010 120 Series LWB and SWB Petrol/Diesel/Bar - FRONT - 40mm Lift Spring Toyota Prado 2010+ 150 Series SWB - Bar & Winch - FRONT - 40mm Lift Spring

DESCRIPTION
Designed in Australia, Tough Dog leaf springs offer a spring pack for just about any application you might require. Our springs are a proven performer in any situation.


Tough Dog leaf springs are a truly progressive rate leaf spring. Each leaf is set slightly higher than the leaf above so there is contact along the whole length of each leaf. There are single stage and two stage springs available for different applications. Primary and secondary stage leaves ensure that the vehicle’s ride remains uncompromised. As the spring is compressed under load, the heavier second stage leaves come into play to prevent excessive sag & remove high stresses from the primary stage.



Precision mandrel & die-formed
Oil quenched, hardened & tempered for maximum life.
Military wrap for safety
Accurately heat-treated
Manufactured from high grade spring steel
Anti-friction pads in most applications
Pre-stressed to maintain ride height
Diamond cut ends
Load rate tested

SPECIFICATIONS
40mm Lift Spring

COMPATIBILITY
Nissan Pathfinder 11/2005 - 2015 R51 - 2.5L, 4.0L - REAR - 40mm Lift Spring Nissan Pathfinder 11/2005 - 2015 R51 - 3.0L V6 - REAR - 40mm Lift Spring

DESCRIPTION
Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world.

Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it.

Shot peened to relieve stress
Scragged and load tested
Formed on precision mandrels
Hot formed to maintain spring memory
Powder-coated for looks and corrosion resistance
E height up to 6” lift available

SPECIFICATIONS
25mm Lift Spring

COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift LWB - REAR

25Mm Lift 0-300Kg Load (Suit Lwb)

Constant 300Kg Load Swb (40Mm Lift (Also 0-300Kg For Lwb))

Tough Dog rear springs with 40mm raised height. (sold in pairs)

The Tough Dog coil springs are designed and manufactured in Australia, and in most cases use the new generation X5K steel in the manufacturing process. An extremely high quality coil spring.

( 4W-TDUK-1734/30) 4W-TDUK-1734/30 URETHANE SPRING SPACER 30MM FRONT

NISSAN / PATROL / 1997-2016

DESCRIPTION When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs. SPECIFICATIONS 1 required per coil as required. COMPATIBILITY Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) - 2in Lift - FRONT Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Leaf) - FRONT Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Coil) - FRONT

( 4W-TDUK-1736/30) 4W-TDUK-1736/30 URETHANE SPRING SPACER 30MM REAR

NISSAN / PATROL / 1997-2016

DESCRIPTION When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs. SPECIFICATIONS 1 required per coil as required COMPATIBILITY Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 2in Lift - REAR Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Coil) - REAR

TOYOTA FJ 2010-2018 0-2.5" LIFT B8 5100 REAR (without reservior)
Lexus GX470 2009-2003, Toyota 4Runner 2020-2003, FJ Cruiser 2014-2007

Product Description

Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

DESCRIPTION
Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world.

Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it.

Shot peened to relieve stress
Scragged and load tested
Formed on precision mandrels
Hot formed to maintain spring memory
Powder-coated for looks and corrosion resistance
E height up to 6” lift available

SPECIFICATIONS
50mm Lift Coil

COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift LWB up to Bullbar - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) - 2in Lift LWB up to Bullbar - FRONT Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Leaf) suit up to Bullbar - FRONT Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Coil) suit up to Bullbar - FRONT Nissan Patrol 1988 - 2015 Y60/Y61 (GQ, GU) - Armoured B2-110kg, B3-150kg, B4-240kg - FRONT

50Mm Lift Coil ( Suit Lwb Up To Bulbar)

DESCRIPTION
When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs.

SPECIFICATIONS
2 Kits required Upper & Lower

COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 2in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 3in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 3in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 4in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 4in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 5in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 5in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 6in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 6in Lift - REAR Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Coil) - REAR

The Tough Dog EXT steering damper is our affordable, heavy duty replacement damper.
Designed for mild applications as a replacement damper when the OEM gear just isn’t quite cutting the mustard, this damper will give you control and feeling back in your steering set up. With a 35mm internal bore and our Foam Cell insert to fight against fade in harsh use situations, this damper is the perfect companion for anyone looking to gain a new lease on life from their steering.

uperb road handling characteristics
35mm bore for heavy-duty use
Eliminate shimmy
Large range to suit most 4WD applications

DESCRIPTION
SS5922-P/S 4X4 Steering Damper Tough Dog suits Jeep Grand Cherokee ZG ZJ
Tough Dog Coil Over Return to Centre 4x4 Steering Dampener
Official Tough Dog Dealer.
This Tough Dog RTC (Return to Centre) Steering Stabilizer is a great improvement in the steering performance of your 4x4. A must for anyone going offroad or fitting larger tyres.
Product Type: Tough Dog - Steering Damper

Description
Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application.

The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade.

Large 41mm internal bore
Twin tube design
High temperature, all weather oil
18mm, double chrome-plated rod
Additional welding on all studs & eyerings
Multi stage Velocity Sensitive Valving
Rod wiper seal and multi lip seal
Hydraulic rebound stop

DESCRIPTION
EXT5617 Tough Dog Steering Damper
Extra Heavy Duty Foam Cell Steering Damper
Official Tough Dealer.

Designed as a replacement damper for when OEM gear just isn’t quite cutting the mustard.
This damper will give you back control and feeling in your steering set up.
35mm internal bore and Foam Cell insert resists fade in hard use situations.
Product Type: Tough Dog - Steering Damper

JEEP JK 2007-2018, 3.5-4'' LIFT B8 5100
SERIES FRONT, SHORT ARM
SUSPENSION (without reservior)


Product Description

Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

Collapsed Length (IN)16.41
Extended Length (IN)27.56
Collapsed Length (MM)416.8
Extended Length (MM)700.0
FinishZinc Plated
ReservoirNo
Body DesignSmooth Body (Non-Coilover)
Body Diameter46mm

NISSAN PATROL Y61 1998-2018 2'' LIFT B6 5100 FRONT VA: KINGSPEED: KSW

Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

JEEP JK 2007-2018, 1.5-3'' LIFT B8 5100 SERIES FRONT, SHORT ARM SUSPENSION (without reservior)
Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.


Collapsed Length (IN)14.98
Extended Length (IN)24.63
Collapsed Length (MM)380.6
Extended Length (MM)625.5
Finish Zinc Plated
Reservoir No
Body Design Smooth Body (Non-Coil over)
Body Diameter46mm

Description
Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application.

The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade.

Large 41mm internal bore
Twin tube design
High temperature, all weather oil
18mm, double chrome-plated rod
Additional welding on all studs & eyerings
Multi stage Velocity Sensitive Valving
Rod wiper seal and multi lip seal
Hydraulic rebound stop
Fitment Note for use with Prado 120 Grande:
Aftermarket replacement strut will eliminate the factory electronic shock control.

NISSAN PATROL GR 2 (Y61) 1998-2018 1.5-2'' LIFT B6 4600 FRONT

Product Description

Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

Description
The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application.

In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications.

40mm internal bore
60mm external casing
18mm chrome-plated rod
High temperature, all weather oil
Foam cell
9 Stage external adjustment
Additional welding on all studs and eye rings

40Mm 9 Stage Adjustable (40Mm Lift)

TOYOTA LC (J10) 1.5-2'' LIFT 1998-2007 B6 4600 REAR (without reservior)


Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

DESCRIPTION
SV5617 4X4 Steering Damper Tough Dog suits Nissan Patrol GU Y61
Official Tough Dog Dealer.
TOUGH DOG's award winning SV Adjustable Steering Stabilizer

Featuring "9 Stage Adjustable Valve" for the Ultimate in Steering Control
* 22mm Chrome Rod with 35mm Bore
* Reinforced welding on pins and eyerings
Another world first for ToughDog.
Product Type: Tough Dog - Steering Damper

Description
The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application.

In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications.

40mm internal bore
60mm external casing
18mm chrome-plated rod
High temperature, all weather oil
Foam cell
9 Stage external adjustment
Additional welding on all studs and eye rings
40Mm 9 Stage Adjustable Shock (Suits 40Mm Lift )

TOYOTA TACOMA 2005-2015/FJ '07-09 4WD/RWD 2.5" LIFT B8 5100, FRONT
oyota 4Runner 2009-2003, FJ Cruiser 2009-2007, Tacoma 2015-2005

Product Description

Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.

Collapsed Length (IN)17.03
Extended Length (IN)22.56
Collapsed Length (MM)432.5
Extended Length (MM)573.0
Finish Zinc Plated
Reservoir No
Body Design Snap Ring Grooved Body (Coil over)
Body Diameter46mm

DESCRIPTION
Front Set of 2 Shock Absorber Tough Dog
Pair of 41mm Bore Foam Cell Strut Shock Absorbers
Official Tough Dog Dealer.
Tough Dog Foam Cell shocks are a large bore shock, (41mm) that are built for heavy-duty use and for coil sprung vehicles. The use of micro-cellular foam inserts has produced a new breed of shocks, which are more resistant to fade.

TOYOTA LC 100 1998-2007 HA: KING SPEED: KSW B6 4600 REAR (without reservior)


Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

GM 2500/3500 HD 2014-2019 0-1.5" LIFT B8 5100 FRONT (without reservior)


Product Description

Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.


Collapsed Length (IN)14.06
Extended Length (IN)18.43
Collapsed Length (MM)357.0
Extended Length (MM)468.0
Finish Zinc Plated
Reservoir No
Body Design Smooth Body (Non-Coil over)
Body Diameter46mm

Tundra 07 On rear 40mm lift Pair of 40mm Bore Adjustable Shock Absorbers
40Mm Adjustable Shocks (Suits 45Mm Lift)

( 4W-TDC632L) 4W-TDC632L SPRING CONSTANT 300KG LOAD 35MM LIFT REAR

MITSUBISHI / CHALLENGER / 2000-2007

DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 40mm Lift Spring COMPATIBILITY Mitsubishi Pajero 8/1988 - 1991 (NF-NG) and 5/1991 - 2000 (NH-NL) Coil Rear - REAR

PRODUCT DESCRIPTION
Features

40mm internal bore
60mm ernal casing
18mm Chrome plated rod
High temperature fluid
Foam cell
9 Stage ernal adjustment
Additional welding on all studs and eyerings

40Mm Adjustable Strut

DESCRIPTION
Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights.

COMPATIBILITY
Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR

DESCRIPTION
Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights.

( 4W-TDR1114) 4W-TDR1114 SHOCK ABSORBERS 53MM NON ADJUSTABLE REAR

TOYOTA / LANDCRUISER / 1998-UP

DESCRIPTION The Tough Dog ‘Ralph’ shock is the largest 4WD shock on the market. We redesigned shocks originally intended for prime movers to suit 4WD applications. The Ralph shock has a massive 53mm bore and 22mm chrome piston rod, all housed in a 70mm casing. These big dogs carry so much oil, they will run cool over even the toughest of terrain. If you drive a fully laden off road tourer, these are the shocks for you. Huge 53mm bore Twin tube design High temperature, all weather oil 22mm double chrome-plated rod Additional welding on all studs & eye rings Multi stage Velocity Sensitive Valving Rod wiper seal and multi lip seal Hydraulic rebound stop COMPATIBILITY Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR - suits up to 25mm Lift Toyota Landcruiser 11/2007+ 200 Series - REAR - suits up to 20mm Lift Toyota Landcruiser 11/2007+ 200 Series - Armoured - REAR - suits up to 20mm Lift

( 4W-TDC734SL) 4W-TDC734SL SPRING 25MM LIFT FRONT

NISSAN / PATROL / 1997-2016

DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 25mm Lift Coil COMPATIBILITY Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift LWB up to Bullbar - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) - 2in Lift LWB up to Bullbar - FRONT

( 4W-TDC742SL) 4W-TDC742SL SPRING 25MM LIFT 0-300KG LOAD REAR

NISSAN / PATROL / 1997-2016

Shot Peened To Relieve Stress, Cragged And Load Tested, Formed On Precision Mandrels, Accurate Heat Treatment To Ensure The Spring Performs As Designed, Powder-Coated For Looks And Corrosion Resistance,O.E Height Up To 6” Lift Available, New Generation X5K Steel Used In Most Applications.

DESCRIPTION
Designed to reduce tail shaft angle and remove driveline vibration that arises from an out-of-phase drivetrain. The universal joints in a vehicle’s tailshaft must operate at the same angle to operate harmoniously. If the angle of one universal joint is different to the other, or the universal joints are forced to operate on an angle larger that within tolerance, the resulting vibration can be felt through the vehicle when driven. To restore the universal joints to harmony, Tough Dog spacer kits are available for vehicles that commonly suffer from vibration.

COMPATIBILITY

( 4W-TDC354) Tough Dog 50mm Raised Height Front Springs (TDC354)

JEEP / WRANGLER / 1996-2007

DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 40mm Lift Spring Suits up to Bullbar (45mm Lift) COMPATIBILITY Jeep Wrangler 10/1996 - 2007 TJ Up to Bullbar - FRONT - 45mm Lift

( 4W-TDC355) 4W-TDC355 SPRINGS 0-300KG LOAD 45MM LIFT REAR

JEEP / WRANGLER / 1996-2007

Tough Dog rear springs with 45mm raised height. (sold in pairs) The Tough Dog coil springs are designed and manufactured in Australia, and in most cases use the new generation X5K steel in the manufacturing process. An extremely high quality coil spring 0-300Kg Load (45Mm Lift)

( 4W-TDC731) 4W-TDC731 SPRING 25MM LIFT FRONT

NISSAN / PATROL / 1988-1998

DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 25mm Lift Coil COMPATIBILITY Nissan Patrol 02/1988 - 1998 GQ (Y60) suits 2in Lift SWB w/Bar - FRONT 25Mm Lift Coil (Suit Swb With Alloy Bar)

( 4W-TDC733) 4W-TDC733 SPRING 25MM LIFT 0-300KG LOAD REAR

NISSAN / PATROL / 1988-1998

DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 25mm Lift Spring COMPATIBILITY Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift - SWB - REAR 25Mm Lift 0-300Kg Load ( Suit Swb)

( 4W-BD1133TB) 4W-BD1133TB SHOCKS 35MM NITRO GAS FRONT

SUZUKI / JIMNY / 1998-2018

Tough Dog front shock absorbers with 35mm gas shocks are suitable for standard to 40mm raised height suspension. (sold in pairs) The Tough Dog 35mm Gas Shock Absorbers have been designed with comfort and control in mind, equipped with velocity sensitive valving they will adjust automatically to road conditions. Ideal for light and medium duty 4WD's. Features include: * 35mm bore size. * Low pressure gas design for comfort and reduced fade. * Double chrome plated shaft. * High temperature resistant fluid. * Standard and long travel options.

( 4W-BD1192TB) 4W-BD1192TB SHOCKS 35MM NITRO GAS REAR

SUZUKI / JIMNY / 1998-2018

Tough Dog rear shock absorbers with 35mm gas shocks are suitable for standard to 40mm raised height suspension. (sold in pairs) The Tough Dog 35mm Gas Shock Absorbers have been designed with comfort and control in mind, equipped with velocity sensitive valving they will adjust automatically to road conditions. Ideal for light and medium duty 4WD's. Features include: * 35mm bore size. * Low pressure gas design for comfort and reduced fade. * Double chrome plated shaft. * High temperature resistant fluid. * Standard and long travel options.

( 4W-TDC790L) 4W-TDC790L SPRING 2 40MM LIFT FRONT

NISSAN / PATROL / 2013-UP

DESCRIPTION Designed in Australia, Tough Dog leaf springs offer a spring pack for just about any application you might require. Our springs are a proven performer in any situation. Tough Dog leaf springs are a truly progressive rate leaf spring. Each leaf is set slightly higher than the leaf above so there is contact along the whole length of each leaf. There are single stage and two stage springs available for different applications. Primary and secondary stage leaves ensure that the vehicle’s ride remains uncompromised. As the spring is compressed under load, the heavier second stage leaves come into play to prevent excessive sag & remove high stresses from the primary stage. Precision mandrel & die-formed Oil quenched, hardened & tempered for maximum life. Military wrap for safety Accurately heat-treated Manufactured from high grade spring steel Anti-friction pads in most applications Pre-stressed to maintain ride height Diamond cut ends Load rate tested SPECIFICATIONS 40mm Lift Spring COMPATIBILITY Nissan Patrol 2010+ Y62 (Non Hydraulic Suspension only) Petrol w/Bar - FRONT

( 4W-TDC795) 4W-TDC795 SPRING 0-120KG LOAD 40MM REAR

NISSAN / PATROL / 2013-UP

DESCRIPTION Designed in Australia, Tough Dog leaf springs offer a spring pack for just about any application you might require. Our springs are a proven performer in any situation. Tough Dog leaf springs are a truly progressive rate leaf spring. Each leaf is set slightly higher than the leaf above so there is contact along the whole length of each leaf. There are single stage and two stage springs available for different applications. Primary and secondary stage leaves ensure that the vehicle’s ride remains uncompromised. As the spring is compressed under load, the heavier second stage leaves come into play to prevent excessive sag & remove high stresses from the primary stage. Precision mandrel & die-formed Oil quenched, hardened & tempered for maximum life. Military wrap for safety Accurately heat-treated Manufactured from high grade spring steel Anti-friction pads in most applications Pre-stressed to maintain ride height Diamond cut ends Load rate tested SPECIFICATIONS 40mm Lift Spring COMPATIBILITY Nissan Patrol 2010+ Y62 (Non Hydraulic Suspension only) - REAR

( 4W-BD1068T) 4W-BD1068T SHOCKS 35MM NITRO GAS FRONT

JEEP / WRANGLER / 1996-2007

35Mm Nitro Gas Shock Absorber Tough Dog front 35mm twin tube nitrogen Gas shock absorbers which are suitable for standard to 35mm raised height. (sold in pairs) The Tough Dog 35mm Gas Shock Absorbers have been designed with comfort and control in mind, equipped with velocity sensitive valving they will adjust automatically to road conditions. Ideal for light and medium duty 4WD's Features include: * 35mm bore size. * Low pressure gas design for comfort and reduced fade. * Double chrome plated shaft. * High temperature resistant fluid. * Standard and long travel options. * Weight: 3.0 kg

( 4W-BD1443T) 4W-BD1443T SHOCKS 35MM NITRO GAS REAR

JEEP / WRANGLER / 1996-2007

PRODUCT DESCRIPTION Features 35mm Internal Bore and piston with twin tube design Low Pressure Nitrogen Gas to eliminate fade for better performance and comfortable ride Double chrome-plated shaft High temperature resistant fluid Custom made for each 4WD up to Hilux size OEM or longer length shocks to suit standard or raised 4WD for maximum articulation, comfort safety & durability