SELECT YOUR VEHICLE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Featured Brands
suspension uae, suspension system, suspension dubai
30+ Years of high level experience | Always competent & successful
Wide range of products | Well respected by our clients
Part Number: BNDL_4W-BM404900_4W-BM401114
SHOCKS 40MM 9 STAGE - ADJUSTABLE - FRONT/REAR
/shop/product/bndl-4w-bm404900-4w-bm401114-shocks-40mm-9-stage-adjustable-front-rear-6807Description:
( 4W-BM404900) 4W-BM404900 SHOCKS 40MM ADJUSTABLE STRUT FRONT
TOYOTA / LANDCRUISER / 2007-UP
Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings
( 4W-BM401114) 4W-BM401114 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR
TOYOTA / LANDCRUISER / 1998- UP
Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings 40Mm 9 Stage Adjustable (Suits Up To 25Mm Lift)
Part Number: BNDL_4W-TDC731_4W-TDC733
SPRING 25MM LIFT 0-300KG LOAD - FRONT/REAR
/shop/product/bndl-4w-tdc731-4w-tdc733-spring-25mm-lift-0-300kg-load-front-rear-67931,533.00 AED 1,533.00 AED 1533.0 AED
1,460.00 AED
Product not available
Add to Cart
Description:
( 4W-TDC731) 4W-TDC731 SPRING 25MM LIFT FRONT
NISSAN / PATROL / 1988-1998
DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 25mm Lift Coil COMPATIBILITY Nissan Patrol 02/1988 - 1998 GQ (Y60) suits 2in Lift SWB w/Bar - FRONT 25Mm Lift Coil (Suit Swb With Alloy Bar)
( 4W-TDC733) 4W-TDC733 SPRING 25MM LIFT 0-300KG LOAD REAR
NISSAN / PATROL / 1988-1998
DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 25mm Lift Spring COMPATIBILITY Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift - SWB - REAR 25Mm Lift 0-300Kg Load ( Suit Swb)
Part Number: BNDL_4W-TDPR-016_4W-TDPR-013
PANHARD ROD - ADJUSTABLE - FRONT/REAR
/shop/product/bndl-4w-tdpr-016-4w-tdpr-013-panhard-rod-adjustable-front-rear-6792Description:
( 4W-TDPR-016) 4W-TDPR-016 ADJUSTABLE PANHARD ROD FRONT
NISSAN / PATROL / 1997-2016
DESCRIPTION Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights. COMPATIBILITY Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 2in Lift - Suits LHD Only - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 3in Lift - Suits LHD Only - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 4in Lift - Suits LHD Only - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 5in Lift - Suits LHD Only - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 6in Lift - Suits LHD Only - FRONT
( 4W-TDPR-013) Adjustable Panhard Rod - Rear (Patrol GU Wagon) NISSAN PATROL Y61
NISSAN / Patrol / 1997 - 2016
DESCRIPTION Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights. COMPATIBILITY Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 2in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 3in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 4in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 5in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) Wagon - 6in Lift - REAR
Part Number: BNDL_4W-BM401047_4W-BM401206
SHOCKS 40MM 9 STAGE - ADJUSTABLE - FRONT/REAR
/shop/product/bndl-4w-bm401047-4w-bm401206-shocks-40mm-9-stage-adjustable-front-rear-6752Description:
( 4W-BM401047) 4W-BM401047 SHOCKS 40MM 9 STAGE ADJUSTABLE FRONT
NISSAN / PATROL / 1997-2016
Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings *Representative Image Contents May Vary
( 4W-BM401206) 4W-BM401206 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR
NISSAN / PATROL / 1997-2016
Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings
Part Number: BIL 24-291859
BIL 24-291859 B6 5100 SERIES-SHOCK ABSORBER 0-2.'' LIFT FRONT (WITHOUT RESERVIOR)
/shop/product/bil-24-291859-bil-24-291859-b6-5100-series-shock-absorber-0-2-lift-front-without-reservior-5834559.91 AED 425.52 AED 425.523 AED
533.25 AED
Product not available
Description:
NISSAN PATROL Y61 1998-2018 2'' LIFT B6 5100 FRONT VA: KINGSPEED: KSW
Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Part Number: BIL 24-146708
BIL 24-146708 B8 5100 SERIES-SHOCK ABSORBER 1.5-3'' LIFT FRONT (WITHOUT RESERVIOR)
/shop/product/bil-24-146708-bil-24-146708-b8-5100-series-shock-absorber-1-5-3-lift-front-without-reservior-5749559.91 AED 410.64 AED 410.6445 AED
533.25 AED
Product not available
Description:
JEEP JK 2007-2018, 1.5-3'' LIFT B8 5100 SERIES FRONT, SHORT ARM SUSPENSION (without reservior)
Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Collapsed Length (IN)14.98
Extended Length (IN)24.63
Collapsed Length (MM)380.6
Extended Length (MM)625.5
Finish Zinc Plated
Reservoir No
Body Design Smooth Body (Non-Coil over)
Body Diameter46mm
Part Number: 4W-TDPR-003
4W-TDPR-003 ADJUSTABLE PANHARD ROD REAR
/shop/product/4w-tdpr-003-4w-tdpr-003-adjustable-panhard-rod-rear-4536Description:
DESCRIPTION
Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights.
COMPATIBILITY
Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR
Part Number: 4W-EXT5613
4W-EXT5613 STEERING STABILIZERS
/shop/product/4w-ext5613-4w-ext5613-steering-stabilizers-4530Description:
The Tough Dog EXT steering damper is our affordable, heavy duty replacement damper.
Designed for mild applications as a replacement damper when the OEM gear just isn’t quite cutting the mustard, this damper will give you control and feeling back in your steering set up. With a 35mm internal bore and our Foam Cell insert to fight against fade in harsh use situations, this damper is the perfect companion for anyone looking to gain a new lease on life from their steering.
uperb road handling characteristics
35mm bore for heavy-duty use
Eliminate shimmy
Large range to suit most 4WD applications
Part Number: BIL 33-187174
BIL 33-187174 B8 5100 SERIES-SHOCK ABSORBER 0-2.5'' LIFT REAR (WITHOUT RESERVIOR)
/shop/product/bil-33-187174-bil-33-187174-b8-5100-series-shock-absorber-0-2-5-lift-rear-without-reservior-3202Description:
TOYOTA FJ 2010-2018 0-2.5" LIFT B8 5100 REAR (without reservior)
Lexus GX470 2009-2003, Toyota 4Runner 2020-2003, FJ Cruiser 2014-2007
Product Description
Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Part Number: BIL 24-186995
BIL 24-186995 B8 5100 SERIES-SHOCK ABSORBER 3.5-4'' LIFT FRONT (WITHOUT RESERVIOR)
/shop/product/bil-24-186995-bil-24-186995-b8-5100-series-shock-absorber-3-5-4-lift-front-without-reservior-3186525.00 AED 391.25 AED 391.251 AED
500.00 AED
Product not available
Description:
JEEP JK 2007-2018, 3.5-4'' LIFT B8 5100
SERIES FRONT, SHORT ARM
SUSPENSION (without reservior)
Product Description
Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Collapsed Length (IN)16.41
Extended Length (IN)27.56
Collapsed Length (MM)416.8
Extended Length (MM)700.0
FinishZinc Plated
ReservoirNo
Body DesignSmooth Body (Non-Coilover)
Body Diameter46mm
Part Number: BIL 24-292757
BIL 24-292757 B6 4600 SERIES-SHOCK ABSORBER STOCK HEIGHT RAER(WITHOUT RESERVIOR)
/shop/product/bil-24-292757-bil-24-292757-b6-4600-series-shock-absorber-stock-height-raer-without-reservior-2077656.25 AED 409.63 AED 409.626 AED
625.00 AED
Product not available
Description:
TOYOTA LC 100 1998-2007 HA: KING SPEED: KSW B6 4600 REAR (without reservior)
Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Part Number: BIL 24-239370
BIL 24-239370 B8 5100 SERIES-SHOCK ABSORBER 0-2.5'' LIFT FRONT (WITHOUT RESERVIOR)
/shop/product/bil-24-239370-bil-24-239370-b8-5100-series-shock-absorber-0-2-5-lift-front-without-reservior-2073614.78 AED 441.08 AED 441.084 AED
585.50 AED
Product not available
Description:
TOYOTA TACOMA 2005-2015/FJ '07-09 4WD/RWD 2.5" LIFT B8 5100, FRONT
oyota 4Runner 2009-2003, FJ Cruiser 2009-2007, Tacoma 2015-2005
Product Description
Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
Collapsed Length (IN)17.03
Extended Length (IN)22.56
Collapsed Length (MM)432.5
Extended Length (MM)573.0
Finish Zinc Plated
Reservoir No
Body Design Snap Ring Grooved Body (Coil over)
Body Diameter46mm
Part Number: BIL 24-196451
BIL 24-196451 B8 5100 SERIES-SHOCK ABSORBER 0-1.5'' LIFT FRONT (WITHOUT RESERVIOR)
/shop/product/bil-24-196451-bil-24-196451-b8-5100-series-shock-absorber-0-1-5-lift-front-without-reservior-2068656.25 AED 448.29 AED 448.287 AED
625.00 AED
Product not available
Description:
GM 2500/3500 HD 2014-2019 0-1.5" LIFT B8 5100 FRONT (without reservior)
Product Description
Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Collapsed Length (IN)14.06
Extended Length (IN)18.43
Collapsed Length (MM)357.0
Extended Length (MM)468.0
Finish Zinc Plated
Reservoir No
Body Design Smooth Body (Non-Coil over)
Body Diameter46mm
Part Number: BIL 24-060431
BIL 24-060431 B6 4600 - SHOCK ABSORBER 1.5-2'' LIFT FRONT (WITHOUT RESERVIOR)
/shop/product/bil-24-060431-bil-24-060431-b6-4600-shock-absorber-1-5-2-lift-front-without-reservior-2059574.88 AED 328.25 AED 328.251 AED
547.50 AED
Product not available
Description:
NISSAN PATROL GR 2 (Y61) 1998-2018 1.5-2'' LIFT B6 4600 FRONT
Product Description
Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Part Number: BIL 24-027403
BIL 24-027403 B6 4600 - SHOCK ABSORBER 1.5-2'' LIFT REAR (WITHOUT RESERVIOR)
/shop/product/bil-24-027403-bil-24-027403-b6-4600-shock-absorber-1-5-2-lift-rear-without-reservior-2058584.85 AED 313.89 AED 313.887 AED
557.00 AED
Product not available
Description:
TOYOTA LC (J10) 1.5-2'' LIFT 1998-2007 B6 4600 REAR (without reservior)
Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Part Number: 4W-TDUK-052
4W-TDUK-052 COMPONENTS TRAILING ARM BUSHING KIT
/shop/product/4w-tduk-052-4w-tduk-052-components-trailing-arm-bushing-kit-1708455.18 AED 455.18 AED 455.175 AED
433.50 AED
Product not available
Description:
DESCRIPTION
When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs.
SPECIFICATIONS
2 Kits required Upper & Lower
COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 2in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 3in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 3in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 4in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 4in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 5in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 5in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 6in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 6in Lift - REAR Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Coil) - REAR
Part Number: 4W-TDUB-020
4W-TDUB-020 U-BOLT KIT
/shop/product/4w-tdub-020-4w-tdub-020-u-bolt-kit-170689.25 AED 89.25 AED 89.25 AED
85.00 AED
Product not available
Description:
DESCRIPTION
When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs.
COMPATIBILITY
Jeep Cherokee 04/1984 - 2001 XJ Limited, Sport - REAR
Part Number: 4W-TDSB-006
4W-TDSB-006 33mm Sway Bar REAR
/shop/product/4w-tdsb-006-4w-tdsb-006-33mm-sway-bar-rear-17031,512.53 AED 1,512.53 AED 1512.525 AED
1,440.50 AED
Product not available
Description:
DESCRIPTION
Designed to reduce tail shaft angle and remove driveline vibration that arises from an out-of-phase drivetrain. The universal joints in a vehicle’s tailshaft must operate at the same angle to operate harmoniously. If the angle of one universal joint is different to the other, or the universal joints are forced to operate on an angle larger that within tolerance, the resulting vibration can be felt through the vehicle when driven. To restore the universal joints to harmony, Tough Dog spacer kits are available for vehicles that commonly suffer from vibration.
COMPATIBILITY
Part Number: 4W-TDC974HH
4W-TDC974HH SPRING 40MM LIFT FRONT
/shop/product/4w-tdc974hh-4w-tdc974hh-spring-40mm-lift-front-1698390.34 AED 390.34 AED 390.3375 AED
371.75 AED
Product not available
Description:
SPECIFICATIONS
40mm Lift Spring
COMPATIBILITY
Toyota Fortuner 2004 - 12/2015 Petrol/Diesel/Bar - FRONT - 40mm Lift Spring Toyota Hilux 04/2005 - 2015 KUN26R (Coil/Leaf) Petrol/Diesel/Bar - FRONT - 40mm Lift Spring Toyota Prado 02/2003 - 2010 120 Series LWB and SWB Petrol/Diesel/Bar - FRONT - 40mm Lift Spring Toyota Prado 2010+ 150 Series SWB - Bar & Winch - FRONT - 40mm Lift Spring
Part Number: 4W-TDC771
4W-TDC771 SPRING 0-300KG LOAD 40MM REAR
/shop/product/4w-tdc771-4w-tdc771-spring-0-300kg-load-40mm-rear-1691Description:
DESCRIPTION
Designed in Australia, Tough Dog leaf springs offer a spring pack for just about any application you might require. Our springs are a proven performer in any situation.
Tough Dog leaf springs are a truly progressive rate leaf spring. Each leaf is set slightly higher than the leaf above so there is contact along the whole length of each leaf. There are single stage and two stage springs available for different applications. Primary and secondary stage leaves ensure that the vehicle’s ride remains uncompromised. As the spring is compressed under load, the heavier second stage leaves come into play to prevent excessive sag & remove high stresses from the primary stage.
Precision mandrel & die-formed
Oil quenched, hardened & tempered for maximum life.
Military wrap for safety
Accurately heat-treated
Manufactured from high grade spring steel
Anti-friction pads in most applications
Pre-stressed to maintain ride height
Diamond cut ends
Load rate tested
SPECIFICATIONS
40mm Lift Spring
COMPATIBILITY
Nissan Pathfinder 11/2005 - 2015 R51 - 2.5L, 4.0L - REAR - 40mm Lift Spring Nissan Pathfinder 11/2005 - 2015 R51 - 3.0L V6 - REAR - 40mm Lift Spring
Part Number: 4W-TDC734L
4W-TDC734L SPRING 50MM LIFT FRONT
/shop/product/4w-tdc734l-4w-tdc734l-spring-50mm-lift-front-1687452.55 AED 452.55 AED 452.55 AED
431.00 AED
Product not available
Description:
DESCRIPTION
Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world.
Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it.
Shot peened to relieve stress
Scragged and load tested
Formed on precision mandrels
Hot formed to maintain spring memory
Powder-coated for looks and corrosion resistance
E height up to 6” lift available
SPECIFICATIONS
50mm Lift Coil
COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift LWB up to Bullbar - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) - 2in Lift LWB up to Bullbar - FRONT Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Leaf) suit up to Bullbar - FRONT Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Coil) suit up to Bullbar - FRONT Nissan Patrol 1988 - 2015 Y60/Y61 (GQ, GU) - Armoured B2-110kg, B3-150kg, B4-240kg - FRONT
50Mm Lift Coil ( Suit Lwb Up To Bulbar)
Part Number: 4W-TDC732SL
4W-TDC732SL SPRING 25MM LIFT 0-300KG LOAD REAR
/shop/product/4w-tdc732sl-4w-tdc732sl-spring-25mm-lift-0-300kg-load-rear-1685390.34 AED 390.34 AED 390.3375 AED
371.75 AED
Product not available
Description:
DESCRIPTION
Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world.
Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it.
Shot peened to relieve stress
Scragged and load tested
Formed on precision mandrels
Hot formed to maintain spring memory
Powder-coated for looks and corrosion resistance
E height up to 6” lift available
SPECIFICATIONS
25mm Lift Spring
COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift LWB - REAR
25Mm Lift 0-300Kg Load (Suit Lwb)
Part Number: 4W-TDC731
4W-TDC731 SPRING 25MM LIFT FRONT
/shop/product/4w-tdc731-4w-tdc731-spring-25mm-lift-front-1683383.25 AED 383.25 AED 383.25 AED
365.00 AED
Product not available
Description:
DESCRIPTION
Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world.
Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it.
Shot peened to relieve stress
Scragged and load tested
Formed on precision mandrels
Hot formed to maintain spring memory
Powder-coated for looks and corrosion resistance
E height up to 6” lift available
SPECIFICATIONS
25mm Lift Coil
COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) suits 2in Lift SWB w/Bar - FRONT
25Mm Lift Coil (Suit Swb With Alloy Bar)
Part Number: 4W-TDC339
4W-TDC339 LWD SPRINGS 300KG LOAD SWB 40MM LIFT REAR
/shop/product/4w-tdc339-4w-tdc339-lwd-springs-300kg-load-swb-40mm-lift-rear-1678390.34 AED 390.34 AED 390.3375 AED
371.75 AED
Product not available
Description:
Constant 300Kg Load Swb (40Mm Lift (Also 0-300Kg For Lwb))
Tough Dog rear springs with 40mm raised height. (sold in pairs)
The Tough Dog coil springs are designed and manufactured in Australia, and in most cases use the new generation X5K steel in the manufacturing process. An extremely high quality coil spring.
Part Number: 4W-SS5922-P/S
4W-SS5922-P/S STEERING DAMPERS
/shop/product/4w-ss5922-p-s-4w-ss5922-p-s-steering-dampers-1673472.50 AED 472.50 AED 472.5 AED
450.00 AED
Product not available
Description:
DESCRIPTION
SS5922-P/S 4X4 Steering Damper Tough Dog suits Jeep Grand Cherokee ZG ZJ
Tough Dog Coil Over Return to Centre 4x4 Steering Dampener
Official Tough Dog Dealer.
This Tough Dog RTC (Return to Centre) Steering Stabilizer is a great improvement in the steering performance of your 4x4. A must for anyone going offroad or fitting larger tyres.
Product Type: Tough Dog - Steering Damper
Part Number: 4W-FC404400
4W-FC404400 SHOCKS 40MM FOAM CELL FRONT
/shop/product/4w-fc404400-4w-fc404400-shocks-40mm-foam-cell-front-1655Description:
Description
Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application.
The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade.
Large 41mm internal bore
Twin tube design
High temperature, all weather oil
18mm, double chrome-plated rod
Additional welding on all studs & eyerings
Multi stage Velocity Sensitive Valving
Rod wiper seal and multi lip seal
Hydraulic rebound stop
Fitment Note for use with Prado 120 Grande:
Aftermarket replacement strut will eliminate the factory electronic shock control.
Part Number: 4W-EXT5617
4W-EXT5617 STEERING STABILIZERS
/shop/product/4w-ext5617-4w-ext5617-steering-stabilizers-1653Description:
DESCRIPTION
EXT5617 Tough Dog Steering Damper
Extra Heavy Duty Foam Cell Steering Damper
Official Tough Dealer.
Designed as a replacement damper for when OEM gear just isn’t quite cutting the mustard.
This damper will give you back control and feeling in your steering set up.
35mm internal bore and Foam Cell insert resists fade in hard use situations.
Product Type: Tough Dog - Steering Damper
Part Number: 4W-EXT5001
4W-EXT5001 STEERING STABILIZERS
/shop/product/4w-ext5001-4w-ext5001-steering-stabilizers-1652Description:
DESCRIPTION
The Tough Dog EXT steering damper is our affordable, heavy duty replacement damper.
Designed for mild applications as a replacement damper when the OEM gear just isn’t quite cutting the mustard, this damper will give you control and feeling back in your steering set up. With a 35mm internal bore and our Foam Cell insert to fight against fade in harsh use situations, this damper is the perfect companion for anyone looking to gain a new lease on life from their steering.
Superb road handling characteristics
35mm bore for heavy-duty use
Eliminate shimmy
Large range to suit most 4WD applications
H/Duty Replacement Damper
Part Number: 4W-BM404400
4W-BM404400 SHOCKS 40MM ADJUSTABLE FRONT
/shop/product/4w-bm404400-4w-bm404400-shocks-40mm-adjustable-front-1636Description:
PRODUCT DESCRIPTION
Features
40mm internal bore
60mm ernal casing
18mm Chrome plated rod
High temperature fluid
Foam cell
9 Stage ernal adjustment
Additional welding on all studs and eyerings
40Mm Adjustable Strut
Part Number: 4W-BM401463
4W-BM401463 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR
/shop/product/4w-bm401463-4w-bm401463-shocks-40mm-9-stage-adjustable-rear-1635Description:
Description
The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application.
In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications.
40mm internal bore
60mm external casing
18mm chrome-plated rod
High temperature, all weather oil
Foam cell
9 Stage external adjustment
Additional welding on all studs and eye rings
40Mm 9 Stage Adjustable Shock (Suits 40Mm Lift )
Part Number: 4W-BM401116
4W-BM401116 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR
/shop/product/4w-bm401116-4w-bm401116-shocks-40mm-9-stage-adjustable-rear-1630Description:
Description
The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application.
In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications.
40mm internal bore
60mm external casing
18mm chrome-plated rod
High temperature, all weather oil
Foam cell
9 Stage external adjustment
Additional welding on all studs and eye rings
40Mm 9 Stage Adjustable (40Mm Lift)
Part Number: 4W-4WAY-001
4W-4WAY-001 REPLACEMENT BUSHES
/shop/product/4w-4way-001-4w-4way-001-replacement-bushes-162261.16 AED 61.16 AED 61.1625 AED
58.25 AED
Product not available
Description:
Suits Bottom Front Eyering (Eyering Bonded Bushing)
Part Number: 4W-TDPR-200
4W-TDPR-200 ADJUSTABLE PANHARD ROD REAR
/shop/product/4w-tdpr-200-4w-tdpr-200-adjustable-panhard-rod-rear-1701Description:
DESCRIPTION
Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights.